answersLogoWhite

0

28 sec gasoil is kerosene and the most common form of home heating oil. The color of kerosene is yellow to clear.

35 sec gasoil, known as red diesel, is used in the construction and farming industries to power tractors and machinery, and to power generators, off road vehicles, and watercraft, . It may also be used in home heating systems that have been set up to use it.

User Avatar

Wiki User

11y ago

What else can I help you with?

Continue Learning about Engineering

What is the difference between fc and fcu in concrete?

f ′c: concrete compressive strength at 28 days (compression is negative) fcu: concrete crushing strength (compression is negative)


What is the difference between N50 and S50 concrete grade?

N50 is 'normal-class' and withstands 50MPa after 28 days of curing. S50 is 'special class' and also withstands 50MPa after 28 days however ay have other properties or require more specific stregth characteristics eg S, for compressive strength grades; SF, for flexural strength grades; or ST, for indirect-tensile strength grades.


What is difference between 43 and 53 grade opc cement?

43 grade OPC Cement it denotes the compressive strength of concrete in 43 Mega pascals will attain in 28 days. it is normally used for pavements, Non RCC structures and which are not important for initial strength. where as 53 Grade OPC Cement it denotes the compressive strength of 53 Mega Pascals will attain in concrete with the 28days, and it is used for RCC strengths and which are important to gain initial strength.


What is the difference between compressive strength and target strength?

Compressive strength of concrete is defined as the concrete cube of 150 mm x 150 mm x 150 mm with specified proportion with 28 days curing.Target mean strength - In order that not more than the specified proportion of test results are likely to fall below the characteristic strength, the concrete mix has to be designed for a somewhat higher target average compressive strength (fck).__fck = fck + t * swhere ___fck is target average compressive strength at 28 days,fck is a characteristic compressive strength at 28 days ands standard deviationt a statistic, depending upon the accepted proportion of low results and the number of tests.


Youngs modulus for en 24 steel?

en 24 is an alloy steel in the .40 carbon range. Young's modulus between 28 and 30 million PSI Tim Engleman