0
What is the difference between Trunnion mounted ball valves and floating ball valves?
Sealing Makes all the difference.
The key difference beteween a floating ball valve and a trunnion mounted ball valve is how each achieves a line seal. Trunion mounted ball valves are uses a spring mechanism and/or line pressure assistance to drive the upstream seat against the stationary ball. The surface area exposed to the pressure through the relatively small passageway is actually just the back of the seat.
The floating ball valve utilize natural line pressure to press and seal the ball against the downstream seat. The line pressure is exposed to a greater surface area - the entire upstream face of the ball, which is an area equal to the actual pipe size.
What else can I help you with?
What is the difference between flange mounted and foot mounted electric motor?
The foot-mounted version is also commonly referred to as B3 motor. The DR motor is available with a NEMA "C-face" flange . The "C-face" flange-mounted motor is a motor type with tapped holes in the flanged end shield.
What is the difference between excavator and backhoe?
Backhoe is like a tractor with a loading aggregate in the front and an excavator arm mounted on the back. Excavators does only have an arm.
How rupture disc fitted in steam condenser?
A rupture disc is mounted between two pipe flanges, one mounted to the condenser the other either unmounted or mounted to a vent pipe.
What is difference in flange and foot mounted?
Flange-mounted motors are attached to equipment using a flat, circular flange that allows for a secure connection, typically suitable for applications requiring precise alignment and stability. In contrast, foot-mounted motors have a base with feet that can be bolted directly to a surface, making them easier to install and providing a more robust support structure. The choice between the two depends on the specific installation requirements, space constraints, and the type of machinery involved.
Why pressure difference in two gauges located in different heights?
In a pipe line or vessel if vertically placed and two pressure gauges mounted in top and bottom places of the pipe line and the internal pressure will very. Top mounted pressure gauge is lower than the bottom mounted pressure gauge. The Pressure will change due to the height variation's. The Internel fluid height acting additional pressure . so that the pressure difference in two gauges located in different heights.
What is the difference between flush and semi-flush mounted ceiling lights?
The difference between flush and semi-flush mounted ceiling lights is that one of them can be mounted on the ceiling and the other one can be mounted elsewhere.
What is trunnion ball valve?
Its a ball valve with a "mounted" ball. Basically, more durable, and more expensive. More torgue, higher pressure etc.
How do you tell the difference between the 351w and the 351c?
The way I tell the difference is the engine thermostat location : On the Cleveland it is mounted horizontally by the distributor and on the Windsor the thermostat is mounted vertically in the end of the intake manifold
What is the difference between chassis and frame?
A frame is the skeleton of a car without the mountings, were as a chasis is a mounted frame.
What is the difference between a Mountie and a police officer?
"Mountie" is just a slang term for a police officer who works for the Royal Canadian Mounted Police. Mounties are police officers. There is no difference between the two.
What is Difference between trailing arm and radius arm?
They are the same, they are mounted parallel to the frame and control the motion of the wheel/axle.
What is the difference between flange mounted and foot mounted electric motor?
The foot-mounted version is also commonly referred to as B3 motor. The DR motor is available with a NEMA "C-face" flange . The "C-face" flange-mounted motor is a motor type with tapped holes in the flanged end shield.
2002 Pontiac Bonneville blower heater motor what is the difference between the sliver or black housing?
The silver housing is mounted in the engine compartment, and the black housing is mounted under the glove box in the passenger area.
What are the benefits of a wall-mounted floating desk in terms of space-saving and aesthetics?
A wall-mounted floating desk saves space by not taking up floor space, making the room feel more open and spacious. It also adds a modern and sleek look to the room, enhancing its aesthetics.
What is the difference between excavator and backhoe?
Backhoe is like a tractor with a loading aggregate in the front and an excavator arm mounted on the back. Excavators does only have an arm.
Whats the difference between suicide and butterfly doors?
Suicide doors would have the hinges mounted on the right side of the door if your looking at the drivers side, left side if your looking at the passengers side. Butterfly doors would have the hinges mounted on the top.
What is the difference between inset and overlay hinges?
Inset hinges are installed inside the cabinet door frame, while overlay hinges are mounted on the outside of the frame. This difference affects how the door opens and closes, as well as the overall appearance of the cabinet.
