They are essentially the same machine. Capstan is British usage, Turret, US. One old and still technically correct usage of Capstan was the (Turnstile winch) were Bars were extended and seamen walked round and round to weigh the anchor. Almost certainly this inspired the lathe term, as this is a maritime country (UK). The Wheel or circular component on a capstan lathe, however is usually three spoked and Vertical and drives the ram ( containing the usually hexagonal turret- 6 tools) back and forth into the work. They are or were very popular in the automotive sector for fabricating standard parts.
The centre lathe has only one coaxial tool, whereas the capstan has a rotating multi tool station with indexer and clutch.
difference between lathe and drill machine doing full on piece of metal
A turret lathe has six-usual tools arranged in the order of use on a rotating turret which is cycled by a large wheel or (Turnstile) like contrivance- in fact some lathe makers calle them Turnstile lathes. the British prefer the term Capstan lathes, the Capstan being that old extended bar device ( somewhat resembling a turnstile) used by seamen to manually raise the anchor- in old Pirate films, etc. The Capstan or Turnstile is oriented vertically, like a steering wheel. they usually have six stops on a hexagon turret. For this reason, a number of automobile makers had hexagonal trademarks such as Essex and Packard- a mark of homage to the machines used to make the parts!- the Turret Lathe.
Centre lathe can use for friction welding.
Lathe specifications· Distance between centers· Swing over the bed· Swing over the cross slide· Horse power of the motor· Number of speeds
The centre lathe has only one coaxial tool, whereas the capstan has a rotating multi tool station with indexer and clutch.
it is basically used for machining..
the centre distance between centre you can turn the component o lathe machine
difference between lathe and drill machine doing full on piece of metal
difference between lathe and drill machine doing full on piece of metal
There is no difference between a turning machine and a lathe. They are two names for the same kind of machine
A wood lathe is designed for shaping wood, while a metal lathe is used for shaping metal. The main difference lies in the materials they are intended to work with.
A turret lathe has six-usual tools arranged in the order of use on a rotating turret which is cycled by a large wheel or (Turnstile) like contrivance- in fact some lathe makers calle them Turnstile lathes. the British prefer the term Capstan lathes, the Capstan being that old extended bar device ( somewhat resembling a turnstile) used by seamen to manually raise the anchor- in old Pirate films, etc. The Capstan or Turnstile is oriented vertically, like a steering wheel. they usually have six stops on a hexagon turret. For this reason, a number of automobile makers had hexagonal trademarks such as Essex and Packard- a mark of homage to the machines used to make the parts!- the Turret Lathe.
Centre lathe can use for friction welding.
Lathe specifications· Distance between centers· Swing over the bed· Swing over the cross slide· Horse power of the motor· Number of speeds
ask the engineers..
All lathes could be considered "centre lathes." You turn "between centers." There's also a tool called a "machining center," but those are for computerized milling, normally of metal.