answersLogoWhite

0

ohms is the unit of resistance while volts is the unit of voltage

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

What is a difference between vollage and watt?

Watts = Volts / Ohms Watts = Volts x Amps


What is the difference between Ohms and Ohms CT in impedance of an audio transformer?

The difference in between Ohms and Ohms CT is that in Ohms CT it has CT at the end.


What is 1000 ohms?

"1,000 ohms" is the resistance of anything through which the current, expressed in amperes, is numerically equal to 0.001 times the potential difference between its terminals, expressed in volts.


If voltage is 12 volts and ohms is 0.5 how many amps in circuit?

Ohm's law: Volts = Amps * Ohms, or Amps = Volts / Ohms 12 volts / 0.5 ohms = 24 amps


Formula for ohms law?

ohms=amps/volts Amps= volts/ohms Volts = Amps*Ohms


Whats the difference between 2 ohms and 4 ohms?

2 ohms of resistance


How do you find OHM?

Ohms can be found by using these formulas. Ohms = Volts/Amps, Ohms = (Volts (squared))/Watts, Ohms = Watts/(Amps (squared)).


What is the different between 2 ohm and 4 ohm?

The difference between 2 ohms and 4 ohms is 2 ohms.


If the potential difference across a load is 60 volts and the resistance of the load is 10 ohms the current is amperes.?

It's not that simple. The basic formula is Volts / Ohms = Amps. For 30 Volts you'd get 0.5 Amps, for 60 Volts you'd get 1 Amp, for 120 Volts you'd get 2 Amps.


How do you calculate ohms?

Very basically, simply divide the voltage by the amperage. Thsi is not for calculating Ohms of resistance, just Ohms. For example, a 9 volt battery that delivers 3 amps has 3 ohms. To calculate ohms of resistance we use the ohms law. This measures the difference in current flow in amps (amps/current is amount or volume of flow, volts is power pushing that current, sort of) and voltage. For instance, measure the amps and voltage at the source and record the ohms. Then record the same at the end point the difference in ohms is ohms of resistance. So, if we measure 10 volts and 2 amps at the source we have 5 ohms. at the end point we have 8 volts and 1 amp we have 8 ohms. therefore we have 13 ohms of resistance. 1 Determine current. Current is the flow of electricity measured in amps. For example a current has four amps in the circuit. 2 Determine voltage. Voltage is the difference in electrical potential from two points, measured in volts. For example, there is two-hundred volts in a circuit. 3 Divide voltage by current to calculate resistance. Resistance is measured in ohms. In the example, two-hundred volts divided by four amps equals fifty ohms. 4 To get ohms of resistance, measure the end point. at the endpoint we have 100 volts and 2 amps=50 ohms. therefore we have 100 ohms of resistance


A potential difference of 104 volts produces a current of 2 amps in a certain resistor. What is its resistance Answer in units of ohms?

E = I x R. Transpose equation for R. E = volts, I = amps, R = resistance (ohms).


How many ohms are there in 12 volts?

Ohms are used to measure resistance, and volts are used to measure potential difference -two completely-different quantities. You might as well be asking, "How many kilometres are there in 12 degrees Celsius?"