A rectifier
how much energy is lost in converting dc energy to ac energy
We don't use an 'instrument' to covert a.c. to d.c.. Rather, we use a circuit called a 'rectifier'.
Yes but is somewhat complicated to get good level DC from an AC source.================================Answer #1.5 :All electronic devices operate on DC ... radios, TVs, computers, stereos, etc.If the device plugs into the wall outlet for power to operate, then the AC fromthe wall outlet is used to produce DC internally to run the device.
ac motor
The power source is AC. Hence AC is used. DC application is limited.
Because, the commutator segments are used for converting AC to DC.
how much energy is lost in converting dc energy to ac energy
Halfwave or fullwave or polyphase AC to DC?
Dual convertor means it converts ac to dc and again it converts dc to ac this phenomenon of converting two types of signal are in the same circuit is called as dual convertor
used for removing of impurities because after converting of ac in to dc with the help of rectifier therefor we are use filter.
Alternating Current ... like in most households.The adapter is either converting DC to AC or vice versa.
how much energy is lost in converting dc energy to ac energy
Some types of dc (direct current) motor can be used to generate dc, in which case they are often called 'dynamos'. Some alternating current (ac) motors can be used to generate ac, in which case they are called 'alternators', but many types will only work as motors. For instance, a squirrel cage ac motor cannot be used as an alternator.
A transformer in an AC unit works by converting the voltage of the electricity from the power source to a level that is suitable for the unit to operate. This allows the AC unit to function properly and efficiently.
NO, generator always generating AC current,when commutator is used,at that time AC is converted in DC.and due to this generator is called dc generator.
It's an ac voltage-converting device with an output voltage of 220 v.
Converting an aircraft to AC power if it was previously on DC is a lengthy procedur that would required the aircraft to be on the ground and partially dismantled. Major engineering conversions are never attempted while an aircraft is in flight.