Non-uniform magnetic field and a phase shift of 120 electrical degrees will occur.
Inductance is inductance, and is not a function of frequency. Frequency affects reactance, and ultimately impedance, not inductance.
The inductance of the field winding in a motor affects the response time of the motor to changes in voltage and current. Higher inductance can lead to slower changes in magnetic field strength, resulting in a more stable operation under steady-state conditions. However, excessive inductance may also limit the motor's ability to respond quickly to dynamic changes, potentially affecting its performance in applications requiring rapid acceleration or deceleration. Overall, an optimal level of inductance is crucial for achieving efficient motor operation.
main focus on inductance calculation
what factors on inductance drepends
Soft iron has a greater permeability than steel. BTW, the only reason for laminations is to reduce eddy currents in the core. It has no effect on permeability or inductance.
Inductance is inductance, and is not a function of frequency. Frequency affects reactance, and ultimately impedance, not inductance.
The length of parallel wire inductance is directly proportional to its effect on the overall inductance value. This means that as the length of the wire increases, the inductance value also increases.
increase inductance
The inductance of the field winding in a motor affects the response time of the motor to changes in voltage and current. Higher inductance can lead to slower changes in magnetic field strength, resulting in a more stable operation under steady-state conditions. However, excessive inductance may also limit the motor's ability to respond quickly to dynamic changes, potentially affecting its performance in applications requiring rapid acceleration or deceleration. Overall, an optimal level of inductance is crucial for achieving efficient motor operation.
it is combined effect of resistance and inductance
main focus on inductance calculation
rotor slot more. it is to get a large rotor inductance value of inductance the stator windings
We are causing an imbalance.
"The magnetic field produced by each turn interacts with the field of other turns and multiplies the effect, causing the inductance of a coil of wire to increase by the number of turns (N) squared. Therefore, if you double the number or turns, you quadruple the inductance."
Type your answer here... By use an inductance meter or an inductance bridge
It is used to measure the inductance of a coil of unknown inductance.
The series resistance (swamping resistance and multiplier) in pressure coil circuit has many turns.So in addition to inductance seen before, there are inter-turn capacitance also.If this capacitance effect exceeds the inductance effect, a phase-shift in pressure coil current will cause an error.When pressure coil capacitance roughly equals the inductance, the errors cancel each other.In most cases the inductance is more than the capacitance and thus the shunting capacitor mentioned before will serve the purpose.