The earth wire connects the metal frame of the electrical appliances to the ground. The convention is to have green colour for earth wires. The purpose of earthing is that in case of an insulation failure in some appliance, this wire connected to the metal body will provide a path for the current to flow on the ground. In absence of earth wire, this fault current would have flown through the body of the operator, causing electrical shock.
That is what the Earth wire does. Normally it does not carry current but it has this important safety function.
A 6 mm earth wire can be used to replace a 2.5 mm earth wire, but if there is an existing 6 mm earth wire it must be 6 mm all the way to the earth, and not replaced by a smaller wire between it and the earth connection.
It allows you to disconnect the load without having to unplug the flexible cable.
it helps in providing constant heat
Yes, a loose neutral wire can effect the operation of Earth Leakage Circuit Breaker.
That is what the Earth wire does. Normally it does not carry current but it has this important safety function.
A neutral wire provides a return path for the hot lead while an earth or "ground" wire is provided as a safety function only that is not normally intended to carry current except for the purpose of operator protection.
The earth wire connects the metal frame of the electrical appliances to the ground. The convention is to have green colour for earth wires. The purpose of earthing is that in case of an insulation failure in some appliance, this wire connected to the metal body will provide a path for the current to flow on the ground. In absence of earth wire, this fault current would have flown through the body of the operator, causing electrical shock.
A 6 mm earth wire can be used to replace a 2.5 mm earth wire, but if there is an existing 6 mm earth wire it must be 6 mm all the way to the earth, and not replaced by a smaller wire between it and the earth connection.
It is the earth wire
Earth wire
The three pins are live, neutral and earth. The live and neutral carry the current, and the earth should carry no current. Its function is to connect together the external parts of all pieces of equipment so that it's impossible to get a shock by touching two items at once. Another function is to connect the external parts to an earth rod and to the gas and water pipes in the property. Another function is that if an internal fault allows a live wire to touch the case, enough current will flow to blow the fuse or trip the circuit breaker. So in different ways the earth pin/wire provides an important safety feature. In Europe the earth wire is coloured green and yellow.
In the visible spectrum or the infrared? Either way, if your earth wire is glowing you have a problem. Your earth wire is not intended as a current carrying wire. If the wire is loaded to the point that it glows then your circuit/breaker is not wired correctly and the earth wire is being used as an unintended path and is a hazard. Earth wires are not sized properly to carry current.
it is the earth wire
earth wire not cnnected from main earth
They are for stripping the insulation off electrical wire.
It has the same function as braces, but is only a wire. Like a retainer.