answersLogoWhite

0

Importance of frequency transformation in filter design are the steerable filters, synthesized as a linear combination of a set of basis filters. The frequency transformation technique is a classical.

User Avatar

Wiki User

10y ago

What else can I help you with?

Continue Learning about Engineering

What is the frequency of a bridge rectifier with no filter present?

It is like a sine-wave, but in the cycle both halves have the same polarity. Alternate half-cycles are reversed in phase so that they are all the same way. The fundamental frequency in the waveform is double the supply frequency, making the design of the filter easier.


What is the lowest frequency of an LC low-pass filter?

The lowest frequency of an LC low-pass filter is zero, i.e. DC.


What should I do to install a low pass filter if my amp doesnt have one?

A: Installing a low pass filter is only required if the frequency are not there or to eliminate the low frequency, If it is an audio amplifier you never will need low frequency since your mine hears cannot hear those frequency.


What is the difference between the Butterworth filter and the Chebyshev filter?

The phase linearity of the Butterworth is better than that of the Chebyshev. In other words, the group delay (derivative of phase with respect to frequency) is more constant with respect to frequency. This means that the waveform distortion of the Butterworth is lower. Of course, with a single input frequency, there is no waveform dostortion in either filter. Another point to consider; the Butterworth filter is completely defined mathematically by 2 parameters: Cutoff frequency and number of poles. The Chebyshev filter has a third parameter: Passband Ripple.


What are the applications of bandstop filters?

for...example..you..have..frequency...range...of..f1-f2-f3-f4, now..your..work..requires..you..to..avoid..frequency..band..of..f2-f3.... what..you..will..do???you..have..to..avoid..or...reject..that..particular..band...so..you..will.. have..to..design..a..filter..circuit..according..to.the..requirement..

Related Questions

What causes sideband frequency?

If you subtract from the carrier frequency the frequency of the tone that modulates it, then filter out the carrier frequency, then you have a lower sideband frequency. If you add to the carrier frequency, filter out the carrier, then you have an upper sideband frequency.


What is the frequency of a bridge rectifier with no filter present?

It is like a sine-wave, but in the cycle both halves have the same polarity. Alternate half-cycles are reversed in phase so that they are all the same way. The fundamental frequency in the waveform is double the supply frequency, making the design of the filter easier.


MATLAB code for FIR filter design in rectangular window using genetic algorithm?

Here is an example MATLAB code for designing an FIR filter with a rectangular window using a genetic algorithm: % Define the desired filter specifications Fs = 1000; % Sampling frequency Fc = 100; % Cutoff frequency N = 51; % Filter order % Define the fitness function for the genetic algorithm fitnessFunc = @(x) designFIR(x, Fs, Fc); % Define the genetic algorithm options options = optimoptions('ga', 'Display', 'iter', 'MaxGenerations', 100); % Run the genetic algorithm to find the optimal filter coefficients [x, fval] = ga(fitnessFunc, N, options); % Design the FIR filter using the obtained coefficients filter = fir1(N-1, x); % Plot the frequency response of the designed filter freqz(filter, 1, 1024, Fs); In the above code, designFIR is a user-defined function that evaluates the fitness of an FIR filter design based on its frequency response. The genetic algorithm is then used to optimize the filter coefficients to meet the desired specifications. Finally, the designed filter is plotted using the freqz function.


What is the recommended frequency for replacing a refrigerator filter?

The recommended frequency for replacing a refrigerator filter is typically every 6 months.


What is the lowest frequency of an LC low-pass filter?

The lowest frequency of an LC low-pass filter is zero, i.e. DC.


What is the recommended frequency for GE SmartWater filter replacement?

The recommended frequency for GE SmartWater filter replacement is every six months.


What is the recommended frequency for replacing the filter on a Samsung refrigerator?

The recommended frequency for replacing the filter on a Samsung refrigerator is every 6 months.


How does a capacitor act as a filter?

The cutoff frequency of filter depends upon the value of capacitor and resistance. Therefore, below cutoff frequency or above this frequency, capacitor allow to pass all other frequencies.


How does a capacitor acts as a filter?

The cutoff frequency of filter depends upon the value of capacitor and resistance. Therefore, below cutoff frequency or above this frequency, capacitor allow to pass all other frequencies.


What is a notch filter?

which filter allows you to evenly boost frequencies above knee frequency


Why frequency response of filter is not flat?

presence of capacitors


How High pass filter circuits works?

A High Pass Filter is an Electronic Filter that passes high frequency signals but Attenuates (reduces the Amplitude ) of Signals with frequencies lower than the cut-off Frequency