0
What else can I help you with?
What is the maximum value power capacity of dry type transformer?
What's the maximum value power capacity of dry type
How are the dry cells connected in series connection?
The voltage will be double that of one dry cell. The current will be that of one dry cell.
When two cells with the same voltage are connected in a series circuit what happens to the voltage?
There is addition of voltage. Dry cells have 1.5 volts irrespective of there size. if the cells are added as same polarity in series it will add if are parallel then voltage remains same
What is the difference between dry and wet contact?
A dry contact is a contact that does not provide voltage. For instance, the push-to-talk switch of a microphone, which just closes a circuit without providing voltage. A wet contact is a contact that will provide voltage when closed, like the switch on the wall that activates the 110 VAC outlet to turn a lamp on in a room. / +------o o---------(o) | +---------------------(o) Dry contact / +------o o---------(o) | --+-- --- Wet contact ------ -+- | +---------------------(o)
Can you measure the internal resistance of dry cell using multimeter?
Well, you do use a multimeter to measure it, but not directly. You need at least one other thing besides the multimeter and the dry cell. Here's a simple way to do it: -- Take a resistor. With the meter set to measure resistance, measure the resistor's value. Call that 'R'. -- With the meter set to measure voltage, measure the voltage of the dry cell. Call it 'V1'. -- Connect the resistor across the dry cell. Measure the dry cell's voltage again. Call it 'V2 ' this time . V2 will be less than V1 . The internal resistance of the dry cell is R times (V1 - V2) / V2
What is the maximum voltage that can be bared by person?
A: The question is not specifically qualified. normally for a dry human it is around 28v for begging to feel it. break the skin or get wet that is another question
Why do we use street tires?
They are designed to provide maximum grip in both wet and dry conditions and over a wide range of surfaces.
How does the voltage measured across a dry cell ompare with the voltage drop measured across three bulbs in series?
The voltage measured across a dry cell is the total voltage output of the cell, typically around 1.5 volts. When three bulbs are connected in series, the total voltage drop across the bulbs will be the same as the voltage output of the dry cell. So, the voltage measured across the dry cell is equal to the voltage drop measured across the three bulbs in series.
Are snakes slimy or dry to touch?
Dry
What is the voltage of a dry cell in a torch battery called?
The cell voltage.
Do legumes like dry or moist conditions?
dry conditions
How long does beeswax take to dry?
Beeswax typically takes about 30 minutes to an hour to dry, depending on the thickness of the application and environmental conditions like temperature and humidity. In warmer, drier conditions, it may dry more quickly, while cooler or more humid environments can prolong the drying time. Once it feels firm to the touch, it is generally considered dry.
What is the maximum value power capacity of dry type transformer?
What's the maximum value power capacity of dry type
What happened to the voltage in the circuit as more dry cells were connected in the series?
The voltage increases in this case.
What preserved in hot and dry conditions?
Mummy's are preserved in hot dry conditions when they are mummified.
How are the dry cells connected in series connection?
The voltage will be double that of one dry cell. The current will be that of one dry cell.
What does power frequency withstand voltage test dry mean?
The withstand voltage is the amount of electrical potential, measured in volts, which can safely be applied to an object in various environments, typically dry or damp or wet conditions, at normal atmospheric pressure and temperature. The object must still remain functional after the voltage test has been completed. This question refers to a test done in dry conditions. The question also mentions power and frequency, which are attributes which refer to the type of electrical service being used to perform the test. The electrical service may be either alternating current, running at a certain frequency, or direct current.
