A generator or an alternator.
Current flowing through a device depends on resistance offered by that device.
"Rated current" is the current the device (motor or transformer?) is designed to handle at full load. "Tripping current" is the current where a protective device (fuse, breaker) will open to protect the device from overload/overheating. "Tripped current", may be the current the tripping device measured prior to making the decision to trip, if you are reading this from a digital protective device like a relay or OCR.
A Rectifier converts Alternating current into Direct current
A transformer. it steps up / down voltage, and steps down / up current.
Answeractive device : they are the devices in which the electron flow( current) can be controlled electrically else a device with controlling of current flowPassive device : they are the device where electron flow ( current ) cannot be controlled electricallyelse a device with out controlling otion of current flowI studied the above from net and i felt it is correctany new definition (more appropriate) are welcome
A device that glows when excited by electric current, but does not generate heat.
Every 'electrical generator' does that.
A device that changes the direction of the current is called a "switch" or a "reversing switch." This device allows for the current to flow in different directions as needed.
Electricity flows in a circuit to generate a current.
A resister limits the amount of current passing through a circuit.
It refers to a device any device whereby the device has limit to carry current. Therefore the term current capacity
An electric motor is a device that converts electrical energy into mechanical energy to turn the blades of a blender. It operates on the principle of electromagnetic induction to generate rotational motion.
Electric current is that current which generate from electric voltage . it flows on your induction motors also on your computer and your television set's cord and every where which device is operate by electricity. doesn't matter what instrument you are operating. it will flow.
A transformer is a device that changes the voltage of an electrical current, either increasing or decreasing it depending on the design.
transistor is a current controlled device. as the current flows through the base of the transistor , it works like a close switch.
An electric current produces energy in the form of heat, light, or mechanical motion, depending on the device or component it is flowing through. It can also generate magnetic fields or cause chemical reactions in some cases.
Triac is the current control device.