0
What else can I help you with?
What are the approximations of open circuit and short circuit tests?
Firstly turn of the power before this test...Using a resistance or continuity tester you should get the following results:Short circuit: Very low resistance (nearly 0 ohms) or the bell will ring.Open circuit: Very high resistance (Somewhere in the range of Mega ohms) or the bell will not ring.The reason for this is because and open circuit has a gap in it (which has high resistance).The short circuit has wires that are crossed and so has a really low resistance.
What is infinite resistance in a circuit?
It isn't. If you're using superposition, you open circuit current sources and short voltage sources; this is because the current source declares the current that will be flowing through that branch. Both current and voltage sources have a finite internal resistance.
When one resistance or load in a series circuit gets defective the circuit becomes?
The circuit will become an open circuit.
How will you convert a open current circuit to a open voltage circuit?
The first thing you need to know is the internal resistance of the current source, the voltage source will have the same internal resistance. Then compute the open circuit voltage of the current source, this will be the voltage of the voltage source. You are now done.
When resistance and continuity test are made on electronic circuit components the circuit being tested should be?
Open
What would happen to circuit if there was no resistance?
a circuit with no resistance or zero resistance can be considered as open circuit in which the current is zero. without resistance the circuit just becomes open ()
What are the approximations of open circuit and short circuit tests?
Firstly turn of the power before this test...Using a resistance or continuity tester you should get the following results:Short circuit: Very low resistance (nearly 0 ohms) or the bell will ring.Open circuit: Very high resistance (Somewhere in the range of Mega ohms) or the bell will not ring.The reason for this is because and open circuit has a gap in it (which has high resistance).The short circuit has wires that are crossed and so has a really low resistance.
An open circuit has an infinate resistance?
There is no such a thing as infinite resistance but it could be a very high resistance.
What is infinite resistance in a circuit?
It isn't. If you're using superposition, you open circuit current sources and short voltage sources; this is because the current source declares the current that will be flowing through that branch. Both current and voltage sources have a finite internal resistance.
When one resistance or load in a series circuit gets defective the circuit becomes?
The circuit will become an open circuit.
What is the resistance when switch is open?
Nothing will happen to the resistance of the circuit. However, with the switch open, it will be 'seen' as having infinite resistance from the supply side.
What occurs during an open circuit?
The resistance goes to infinity.
How will you convert a open current circuit to a open voltage circuit?
The first thing you need to know is the internal resistance of the current source, the voltage source will have the same internal resistance. Then compute the open circuit voltage of the current source, this will be the voltage of the voltage source. You are now done.
When resistance and continuity test are made on electronic circuit components the circuit being tested should be?
Open
How do you fix obd11 code 446?
Replace the vent valve. Repair open, short, or resistance problem in the control circuit. Repair an open, or short, or resistance problem in the power circuit, or replace the PCM.
Does an Ohmeter that has an infinite reading indicates an open circuit?
Yes, an infinite reading on an Ohmmeter usually indicates an open circuit. This means that there is a break in the circuit, preventing the flow of current and resulting in the high resistance reading.
Why short circuit and open circuit are equivalent appropriate?
In circuit equivalence, voltage and current sources are respectively equated to short and open ckt because of the very nature of them. A voltage source has zero internal resistance and current source has infinite internal resistance hence their equivalents:-)
