0
What else can I help you with?
Can a leyden jar power a 60 watt bulb?
It can only power a flash light!
How many amps in a low voltage light bulb?
Look on the light bulb for the voltage and the power in watts. Then divide the watts by the voltage and that gives the amps. Some CFL bulbs also state the current as well as the voltage and power, which is because they can have a poor power factor.
What cant be use complete a circuit to make a light bulb glow?
A simple circuit contains: Power source - battery, wall outlet Path - wire or other conductor Load - light bulb Start with a small light bulb... see if you have extra bulbs for the car, tail light bulbs for example. Hook one wire to a pole on a 9v battery, then the tip of the light bulb's connection end. Then a second wire on the side of the bulbs connection end, and return to the source.
Why is the power of a light bulb large?
Most light bulbs waste energy as heat. Even LEDs. Large light bulbs require more power.
What components do you need to make a simple series circuit to light on bulb?
You need a Battery, Light Bulb, Ammeter, Switch.
How does a lemon power up a light bulb?
A lemon can power up a light bulb by acting as an electrolyte in a chemical reaction with the metals in the light bulb. When zinc and copper electrodes are placed in the lemon, a chemical reaction creates an electrical current that can power a small LED light bulb.
What is the power of light bulb mesured in?
a light bulb is measured in watts
How much volts does a small light bulb need to be powered?
110 volts is what comes out of an average wall socket in America. A 100-watt bulb would be powered by 110 volts. You need to be more specific in your question to get a good answer. Small can't be measured.
Can a pickle light up a light bulb?
Yes, a pickle can light up a light bulb if it is used to complete an electrical circuit. Pickles contain electrolytes that can act as conductors of electricity, allowing them to power a simple circuit and light up a small light bulb.
How is a light bulb powered?
light r bulb same power taken
How can you power a light bulb with a carrot?
A carrot can be used as a battery to power a light bulb by inserting two different metal electrodes (such as copper and zinc) into the carrot, and connecting a light bulb between them. The acidity in the carrot acts as an electrolyte, allowing a small amount of electric current to flow through the circuit and light up the bulb.
Can an apple power a light bulb?
No, an apple does not contain enough energy to power a light bulb. A light bulb requires electricity to produce light, which usually comes from a power source such as batteries, generators, or electrical outlets. The energy stored in an apple is not enough to produce the amount of electricity needed to power a light bulb.
What is the proper way to install a light bulb into a light bulb receptacle?
To install a light bulb into a light bulb receptacle, first make sure the power is turned off. Then, gently insert the base of the light bulb into the receptacle and twist it clockwise until it is securely in place. Finally, turn the power back on to test the light bulb.
How can I safely change a light bulb using a light bulb stick?
To safely change a light bulb using a light bulb stick, follow these steps: Turn off the power to the light fixture. Use a stable ladder to reach the light bulb. Attach the light bulb stick to the bulb securely. Unscrew the old bulb and carefully remove it. Insert the new bulb and screw it in place. Remove the light bulb stick and turn the power back on.
Does the light bulb light up?
Only when it has power.
How must the light bulb be connected in order for it to light up?
The light bulb must be connected in a closed circuit with a power source, such as a battery or electrical outlet, for it to light up. This means that the positive terminal of the power source must be connected to the positive terminal of the light bulb, and the negative terminal of the power source must be connected to the negative terminal of the light bulb. This allows the flow of electricity to power the light bulb and make it light up.
What are the minimum requirements in order to light the bulb?
To light a bulb, you typically need a power source (such as a battery or electrical outlet), a conductive material to connect the bulb to the power source (such as wires), and a functioning bulb itself. When these components are properly connected and the power is supplied, the bulb should light up.
