110 volts is what comes out of an average wall socket in America. A 100-watt bulb would be powered by 110 volts. You need to be more specific in your question to get a good answer. Small can't be measured.
it all depends on what the bulb is rated for4 extra volts on a 120 volt bulb is negligable4 extra volts on a 1 volt bulb will definitely pop the element, but I don't think it would explodeAnswerDepends on the bulb voltage, but it shouldn't explode. If it's a 6volt bulb or lower, it would burn out quickly.If it's a 12volt bulb or higher, it may have a shorter life, but it would be brighter.
A fluorescent light bulb typically operates on a voltage range of 100-277 volts, depending on the specific model and design. The most common standard voltage for residential use in the United States is 120 volts.
15.
A typical big light bulb, like an incandescent bulb, usually requires around 120 volts to operate. However, it's always best to check the specific voltage requirements listed on the bulb itself or its packaging to ensure safe and proper operation.
Yes, a 103 volt source will light a 60 watt light bulb. The relationship of the bulb's wattage output at a lower voltage, as to the normal voltage that the bulb is rated to operate on, the light output will be lower.
what is a conclusion for a battery powered light bulb
light r bulb same power taken
If a light bulb is rated at 60 Watts, the voltage will depend on the specific type of bulb. For a typical incandescent bulb, the voltage would be around 120 volts. However, for an LED or CFL bulb, the voltage could be different, such as 120 volts or 240 volts.
Um, a 5 volt light bulb?
Onions don't have volts.
it all depends on what the bulb is rated for4 extra volts on a 120 volt bulb is negligable4 extra volts on a 1 volt bulb will definitely pop the element, but I don't think it would explodeAnswerDepends on the bulb voltage, but it shouldn't explode. If it's a 6volt bulb or lower, it would burn out quickly.If it's a 12volt bulb or higher, it may have a shorter life, but it would be brighter.
A light bulb connected between to wires, each having 300 volts to ground that are in phase, will not light, because there is no differential voltage available to do any work. If each wire has 300 volts to ground and are out of phase (600 volts between them) the light bulb will be lit, if it is rated at least for 600 volts, otherwise it will burn out.
Each light bulb will receive the full 9 volts from the battery in a series circuit, so each bulb will be operating on 9 volts.
In the 19th century, light bulbs were powered by electricity generated from sources such as coal, water, or gas. These power sources were used to create light by heating a filament inside the bulb until it produced light.
2002
Small bulbs come in many different voltages. It will always be marked on the bulb and will only work correctly with that proper voltage applied.
12 volts