it all depends on what the bulb is rated for
4 extra volts on a 120 volt bulb is negligable
4 extra volts on a 1 volt bulb will definitely pop the element, but I don't think it would explode
AnswerDepends on the bulb voltage, but it shouldn't explode.If it's a 6volt bulb or lower, it would burn out quickly.
If it's a 12volt bulb or higher, it may have a shorter life, but it would be brighter.
110 volts is what comes out of an average wall socket in America. A 100-watt bulb would be powered by 110 volts. You need to be more specific in your question to get a good answer. Small can't be measured.
When a light bulb receives more than 120 volts, it will likely generate more heat than it is designed to handle, causing it to burn out or potentially shatter. This can be a safety hazard as the excess voltage can lead to overheating and fire risk. It is important to always use the correct voltage for light bulbs to ensure proper functioning and safety.
15.
2 watts is a unit of power that measures how much energy is being used per second. It is a small amount of power commonly found in small electronic devices like LED light bulbs or smartphone chargers.
A fluorescent light bulb typically operates on a voltage range of 100-277 volts, depending on the specific model and design. The most common standard voltage for residential use in the United States is 120 volts.
There are no volts in a light. A light consumes power.
The Netherlands uses 220 volts at 50hz and the UK uses 230 volts at 50 hz. So as long as you use a 230 volt light bulb in your UK home the fixture will work perfectly. It can handle the extra 10 volts.
110 volts is what comes out of an average wall socket in America. A 100-watt bulb would be powered by 110 volts. You need to be more specific in your question to get a good answer. Small can't be measured.
6 volts
As many as you want. But where do you find 640 volts RMS?
The recommended voltage for 130-volt light bulbs is 130 volts.
Onions don't have volts.
No, the extra voltage will burn them out very quickly !
A light bulb connected between to wires, each having 300 volts to ground that are in phase, will not light, because there is no differential voltage available to do any work. If each wire has 300 volts to ground and are out of phase (600 volts between them) the light bulb will be lit, if it is rated at least for 600 volts, otherwise it will burn out.
Gas is 12 volts and diesel is 24 volts
When a light bulb receives more than 120 volts, it will likely generate more heat than it is designed to handle, causing it to burn out or potentially shatter. This can be a safety hazard as the excess voltage can lead to overheating and fire risk. It is important to always use the correct voltage for light bulbs to ensure proper functioning and safety.
Each light bulb will receive the full 9 volts from the battery in a series circuit, so each bulb will be operating on 9 volts.