It depends on the size of the roll,
To size a toilet siphon, you need to consider the dimensions of the toilet bowl and the design of the siphon itself. Measure the diameter of the toilet's drain outlet and match it with the siphon's outlet size, ensuring it provides adequate flow without causing clogs. Additionally, assess the siphon's height and overall design to ensure it fits within the toilet tank while allowing for proper flushing performance. Always refer to manufacturer specifications for compatibility with specific toilet models.
3 or 4 inch
There really does not... it depends on the type and size of the toilet, but as a rule of thumb that size covers most toilets, and is a comfortable distance to work for most situations.
Depends on what kind of bowl you have. Could be 10" or 12". That is standard.
The standard size of a toilet flange is typically 4 inches in diameter.
The standard toilet supply line size is typically 3/8 inch in diameter.
No the standard toilet seat covers are for the standard round toilet seats. The universal will fit the long oblong shaped toilet seats.
The standard toilet bolt size for most toilets is 5/16 inch in diameter and 3.5 inches in length.
The standard toilet seat size for most toilets is approximately 14 inches wide and 16.5 inches long.
For a standard toilet installation, it is recommended to use a wax ring that is a standard size of 3 or 4 inches in diameter. This will help create a proper seal between the toilet and the floor drain.
Not all toilet papers are that size. That might be the standars size because the tissue holders are that size as well. But there are othere kinds of tissues which are different in size.Toilet paper is a standard width so it will fit in toilet paper holders.
Will a American standard toilet tank fit a glacier bay toilet
Standard height is 15" but you can get comfort height or ADA models which are 17" high. The standard toilet rough in dimension is 12", which means the outlet of the toilet at the floor is 12" from the unfinished wall, but they do make 10" and 14" rough in models. The width really depends on the type of toilet you get but remember International Plumbing Code requires 15" from the center of the toilet to the nearest wall. Hope that helps.
Yes, I have an American Standard toilet and an Olsonite toilet set.
For a standard toilet installation, you will typically need a wax ring with a 3 or 4-inch diameter. Make sure to check the specific requirements of your toilet model before purchasing.
The standard dimensions for a toilet can vary depending on the country you live in. The American standard is either 14 or 15 inches.