answersLogoWhite

0

In the CDMA technology It is either between your Handset and the Mobile Station. The dedicated frequency are allocated for u sending your data to the mobile station (Uplink freuency) and a dedicated frequency is reserved for you to receive your data from the mobile station (Downlink frequency)

User Avatar

Wiki User

14y ago

What else can I help you with?

Related Questions

What is gsm uplink?

Hi, For every GSM band there are Uplink and downlink frequencies. Example: GSM 900 TX: 880 MHz to 915 MHz is an uplink frequency range GSM 900 RX: 925 MHz to 960 MHz is a downlink frequency range Aloha, Maverick


What is the radio frequency numbers for the ISS station?

Worldwide downlink for voice - 145.80Worldwide packet uplink/downlink - 145.825Region 1 voice uplink - 145.20Region 2 and 3 voice uplink - 144.49Worldwide uplink for cross band voice repeater - 437.80Worldwide SSTV downlink - 145.800For more information, visit the NASA ISS Amateur Radio page at http://spaceflight.nasa.gov/station/reference/radio/


How do you calculate downlink frequency by uplink?

You would need to know the LO frequency from the satellite. Ex- C-band is 2200Mhz If you UL is 6.0GHz you DL would be 3.8GHz


Why gsm 880 mhz to 915 mhz is known as downlink frequency?

This is actually the EGSM uplink band. It carries signals "up" from the mobile station to the base station. EGSM downlink is from 925MHz to 960MHz and carries signals from the base station "down" to the mobile station.


Frequency band of uplink in GSM?

1800mhz


Why is the gsm 900 better than gsm 1800 and gsm 1900?

As the frequency increase its penetration power decreases.The signal travels a lesser distance.Hence for a perticular area more no of towers need to be erected in 1800/1900 than in 900MHZ for full coverage...Hence vodafone( 1800MHZ) has more towers per unit area than Idea Cellular ( 1800+900) ..... Band of 900 is from 890-915( uplink) 935-960Mhz( downlink).... Band of 1800 is from 1710-1785(uplink) and 1805-1880MHZ(Downlink).... Same property is followed here.....The uplink is lower ( MOBILE -BTS) than the downlink frequency (BTS-MOBILE)...so that this may help the uplink signal to travel futher without consuming much power...BTS due to its increased power ,has higher frequency to tavel the same distance....


What describes a signal with a frequency of 20GHz in a satellite radio transmissions?

A downlink signal; a Ka Band signal


What describes a signal with a frequency of 20 GHz in satellite radio transmissions?

A downlink signal A Ka Band signal


What is the down link frequency to earth?

The downlink frequency to Earth, in the context of communication satellites or spacecraft, refers to the frequency at which data is transmitted from the satellite to Earth. The specific frequency used can vary depending on the satellite system and the communication protocol being employed. Generally, downlink frequencies for satellite communication are in the microwave frequency range, typically between 1 to 50 GHz. The choice of downlink frequency is influenced by factors such as transmission range, atmospheric absorption, and regulatory requirements.


What is the frequency range in satellite communication?

The satellite transponder typically works in either the C-band (4-8GHz) or the Ku-band (12-18GHz) and these are for the downlink (from the satellite to the earth station).


What are up link and down link frequencyof gps?

GPS satellites transmit on two primary frequencies; band L1 is 1.57542 GHz, and band L2 is 1.22760 GHz. The uplink frequency is restricted and/or classified information.


What are the differences between dual band and quad band phones?

Basically, the difference lie on the frequency being used or supported. For GSM dual band phones, the frequencies that is can support are 900/1800 MHz or 850/1900 MHz; for tri-band phones, the frequencies are 850/1900/2100 or 850/1700/2100 or 900/1900/2100 MHz or 900/AWS/2100; and for quad-band phones, the frequencies are 850 / 900 / 1800 / 1900