0
What else can I help you with?
What is the density of Ordinary Portland Cement?
The density of Portland cement is 1.44 ton/m3.
The strength of Portland cement?
The strength of ordinary portland cement is available in three grades,33 grade - If the 28 days strength is not less than 33 N/mm243 grade - If the 28 days strength is not less than 43 N/mm253 grade - If the 28 days strength is not less than 53 N/mm2
How many shovels does one 25 kg bag of cement hold?
To determine how many shovels one 25 kg bag of cement can hold, we first need to know the volume of a shovel. Let's assume a typical shovel can hold around 0.01 cubic meters of cement. Next, we need to convert the weight of the cement to volume using its density, which is around 1440 kg/m^3 for cement. This means a 25 kg bag of cement is approximately 0.017 cubic meters. Dividing this volume by the volume of one shovel gives us around 1.7 shovels per bag of cement.
How to convert Ethylene glycol solution weight percent to volume percent?
Assume that you have a 25wt% solution of EG. That means you have 25 kg for every 100 kg of solution. Assuming that the EG is dissolved in water means that the solution would contain 25 kg of EG and 75 kg of water. To find the volume % you need to convert each component to a volume by using their densities. The density of water is 1000 kg/m3 and EG is 1113 kg/m3. Using this data we can figure out the volume of each component of solution. For water: 75 kg / (1000 kg/m3) = 0.075 m3 For EG: 25 kg/(1113 kg/m3) = 0.0225 m3 %Vol = 0.0225 m3 / (0.0225 + 0.075 m3) = 0.231 or 23.1% vol
How much cement required 1 cubic meter m10 grade concrete?
To calculate the amount of cement required for 1 cubic meter of M10 grade concrete, which has a mix ratio of 1:3:6 (Cement: Sand: Aggregate), you can use the following formula. The total parts of the mix are 1 + 3 + 6 = 10 parts. For 1 cubic meter, the volume of cement required is approximately 1/10 of the total volume, which is about 0.1 cubic meters. Given that the density of cement is around 1440 kg/m³, you would need approximately 144 kg of cement for 1 cubic meter of M10 concrete.
What is the volume of 1000 kilogram of cement?
The volume is(1000)/(density of cement in kg/m3) cubic meters.
What is fineness of cement?
Portland cement (often referred to as OPC, from Ordinary Portland Cement) fineness 300 - 500 m2/kg
What is the density of Ordinary Portland Cement?
The density of Portland cement is 1.44 ton/m3.
What is the weight of cement mortar?
unit weight of cement, Portland is 1506 kg/cu.m unit weight of cement, mortar is 2162 kg/cu.m cement, slurry is 1442 kg/cu.m
How much the volume of 42.5kg cement bag?
The volume of a 42.5 kg bag of cement can be estimated based on the density of the cement, which is typically around 1,440 kg/m³. Using this density, the volume can be calculated as follows: Volume = Mass / Density. Thus, the volume of a 42.5 kg bag of cement is approximately 0.0295 cubic meters, or about 29.5 liters.
What is the volume of 50 kg cement in cubic -metre?
as unit weight of cement varies from 830kg/cu.m-1650kg/cu.m volume of cement of 50 kg. varies 0.060241cu.m to 0.030303cu.m if the cement is port-land cement unit weight would be 1440kg/cu.m then the volume would be 0.034472 cu.m
How many kg for 1 meter cube in cement?
One cubic meter of cement typically weighs about 1,440 kilograms. This weight can vary slightly based on the specific type and density of the cement used, but 1,440 kg is a common estimate for ordinary Portland cement.
What is the weight of 1.25 cf of cement?
The weight of 1.25 cubic feet of cement can vary depending on the type of cement being used. On average, a bag of Portland cement weighs around 94 pounds. Therefore, 1.25 cubic feet of Portland cement would weigh approximately 117.5 pounds.
How do you get cement volume to dencity?
To calculate the density of cement, you need to know the mass of the cement and its volume. Divide the mass of the cement by its volume to get the density. The density of cement is typically around 1,440 kg/m³.
What is bulk density of Ordinary portland cement 53 grade?
1086 kg per m3 (bulk: not the press surface) 1184 kg per m3 (bulk: press surface but not bang) 1365 kg per m3 (press surface and bang 5 more time)
How many ton in 1 cubic meter of clay?
volume = mass ÷ density. 1 tonne = 1000 kg The volume depends upon the density of the clay which will vary with how wet it is. Dry clay has a density of 1600 kg/m3 → volume = 1000 kg ÷ 1600 kg/m3 = 0.625 m3 Wet clay has a density of 1760 kg/m3 → volume = 1000 kg ÷ 1760 kg/m3 ≈ 0.568 m3 Which means the volume of 1 tonne of clay will be in the range of approx 0.568 m3 to 0.625 m3
1 cubic meter is equal to how much kg of cement?
Cement content varies on concrete type, but is typically 400kg per cubic metre. According to the manufacturer, Portland Cement (which is what 99.9% of all cement actually is) has a density of 1505kg/cubic meter.
