Type your answer here... 3.85
Calculate the length of steel you are going to use the building and muliply the length with unit weight of the steel.ex: 12 m 25mm steel weight is12 x 3.85 =46.2 kg3.85 kg/m is the unit weight of 25mm bar
To find the diameter calculation in millimeters of the bearing number "6205," you need to multiply the final two numbers by five. This will leave you with 25mm.
D*d/162 = 25*25/162 = 3.85kg/m
Engineering measurement tolerances are the permissible limits of variation in measurements. Example a piece of steel 25mm square where it would be allowed to be +.001mm or -.001mm on this size. The plus or minus is the tolerance
If the Honey Comb portion is less than 25mm in depth, you can fill it with MC-crete or GP2 or any other micro concrete after applying anti rust paint on exposed steel and chipping off all the loss material in the comb
A mild steel ERW tube 25mm diameter with 2mm wall with 1000 mm length weighs about 1.2kg
The weight of a 25mm x 25mm x 2mm steel tube can be calculated by multiplying the volume of the tube by the density of steel. The formula for calculating the weight is Weight = Volume x Density. Once you calculate the volume (length x width x thickness) and multiply it by the density of steel (usually around 7850 kg/m^3), you will get the weight of the steel tube.
375 pounds
Half a meter
It will depend on the thickness of the plywood!
The weight of a 25mm thick steel plate can vary depending on the density of steel, which is typically around 7.85 grams per cubic centimeter. To calculate the weight, you would need to determine the dimensions (length and width) of the plate. Then, you can multiply the volume (length x width x thickness) by the density to get the weight in grams or convert it to kilograms or pounds as needed.
25mm = 0.025 meters (you divide mm by 1,000 to convert to meters).
Calculate the length of steel you are going to use the building and muliply the length with unit weight of the steel.ex: 12 m 25mm steel weight is12 x 3.85 =46.2 kg3.85 kg/m is the unit weight of 25mm bar
The number of pieces in one ton of steel bar varies depending on the size and weight of the individual bars. Standard sizes like 20mm or 25mm diameter bars can range from around 65 to 80 pieces per ton.
To calculate the weight of the steel rod, you first need to find the volume using the formula for the volume of a cylinder (V = πr^2h, where r is the radius and h is the height). Then, you can calculate the weight by multiplying the volume by the density of steel, typically around 7850 kg/m^3. Finally, convert the volume into meters before calculating the weight to ensure consistent units.
25mm
The weight of rebar can be calculated using the formula: weight = (diameter^2 * length * 0.006165) kg, where the diameter is in mm and length is in meters. Substituting the given values, the weight of the rebar would be approximately 22.98 kg.