answersLogoWhite

0

A mild steel ERW tube 25mm diameter with 2mm wall with 1000 mm length weighs about 1.2kg

User Avatar

Wiki User

11y ago

What else can I help you with?

Related Questions

What is the formula for calculating weight using a mild steel cylinder?

gear with shaft dia40mm length 230 teeth 14 shaft dia 25mm width 6.5mm length 168mm


What is unit weight of mild steel bars?

[diameter]^2 / 162 kg 1.580 kg / meter


How can calculate weight of 40mm dia and 3mm thickness MS pipe?

To calculate the weight of a 40mm diameter and 3mm thickness mild steel (MS) pipe, use the formula for the weight of a hollow cylinder: Weight = Volume × Density. First, calculate the outer diameter (OD = 40mm), inner diameter (ID = 34mm), and then the volume (V = π/4 × (OD² - ID²) × Length). The density of mild steel is approximately 7850 kg/m³. Multiply the volume by the density to find the weight.


What is the Weight of Mild Steel Angles different sections?

what is the weight od 25x25x3 mm mild steel angle per meter


What is the weight of mild steel pipe OD 40mm and wall thickness 4mm?

=3.14 * (Diameter of pipe in Mtr. - wall thickness in Mtr. ) * Wall Thickness in Mtr. * 7850


What is the weight per square meter of 2mm thick HRCA mild steel sheet?

The weight of mild steel can vary slightly depending on the exact composition, but as a general rule of thumb, the weight of a 2mm thick hot rolled commercial quality mild steel sheet is approximately 15.7 kilograms per square meter.


What is the weight of A mild steel rod of 12 m m?

10.66


What is the weight of 50x50x5 mm mild steel angle per meter length?

What is the weight of 50x50x5 mm mild steel angle per metre length? Density mild steel is 7.85 g/cm3 Volume is 2x(4.5x0.5x100)+(0.5x0.5x100)=475 cm3 Weight is 7.85x475=3728.75 g (per metre).


What is the weight of steel bars per foot?

For Mild Steel Bars: Diameter (in inches): 1/4" Weight per foot: 0.167 lb/ft Diameter (in inches): 3/8" Weight per foot: 0.376 lb/ft Diameter (in inches): 1/2" Weight per foot: 0.668 lb/ft Diameter (in inches): 5/8" Weight per foot: 1.043 lb/ft Diameter (in inches): 3/4" Weight per foot: 1.502 lb/ft Diameter (in inches): 1" Weight per foot: 2.670 lb/ft For High-Strength Deformed (HSD) Steel Bars (commonly used in construction): Diameter (in millimeters): 8 mm Weight per meter: 0.395 kg/m Diameter (in millimeters): 10 mm Weight per meter: 0.617 kg/m Diameter (in millimeters): 12 mm Weight per meter: 0.888 kg/m Diameter (in millimeters): 16 mm Weight per meter: 1.579 kg/m Diameter (in millimeters): 20 mm Weight per meter: 2.467 kg/m Diameter (in millimeters): 25 mm Weight per meter: 3.853 kg/m


How do you calculate weight of mild steel plate?

when you need to find mass or weight of 80mm thick mild steel plate then just measure it's length and width and multiply by it's mass or weight per sqm. volume of steel = 2.5x1.25x.08 = 0.25 cub.m assuming your steel to be mild steel (if the steel is different then place appropriate density for it and you need to workout as below) density of mild steel= 7850 kg/m3 mass of steel = 0.25x7850 = 1962.50 Kg weight of steel = 1962.50x9.81 = 19252.13 N A little time saver for next time: Area of steel = 2.5x1.25 = 3.125 sqm so mass per sqm = 1962.50/3.125 = 628 Kg weight per sqm = 19252.13/3.125 = 6160.68 N


What are the weights of 50mm 60mm and 75mm dia hollow m s pipe?

The weight of a hollow MS (mild steel) pipe is determined by its dimensions and material density. You can calculate the weight using the formula: weight (kg) = (outer diameter - inner diameter) x inner diameter x length x density of MS. The specific density of MS used will affect the weight of the pipe.


What is the weight per meter of 40 mm dia ms pipe hallow pipe?

The weight of a hollow MS (mild steel) pipe depends on the thickness of the pipe wall. The weight can be calculated by using the formula: Weight = 0.02466 * Thickness * (Outer Diameter - Thickness) for a round hollow pipe.