0
What else can I help you with?
Who can remove the energy control device that has been placed on an operation?
The energy control device, often referred to as a lockout/tagout (LOTO) device, can only be removed by the authorized employee who placed it on the operation. In cases where that employee is unavailable, a qualified supervisor may remove it, but only after ensuring that the work has been completed and it is safe to do so. Proper procedures must always be followed to maintain safety during the removal process.
What inhibits is required to open the Turbine enclosure?
To open the turbine enclosure, specific safety protocols and inhibitors must be followed, typically including lockout/tagout (LOTO) procedures to ensure that the turbine is completely shut down and cannot be accidentally started. Additionally, access may require the removal of physical barriers or locks, and verification that all systems are de-energized. It’s essential to follow manufacturer guidelines and safety regulations to prevent any risk of injury or equipment damage.
How would isolate elctric supply from 3phase capacitors?
To isolate electric supply from three-phase capacitors, you can use disconnect switches or circuit breakers specifically designed for three-phase systems. These devices should be installed on the supply side of the capacitors to safely interrupt the current flow. Additionally, ensure to follow proper safety protocols and lockout/tagout procedures to prevent accidental energization while performing maintenance or inspections. Always consult electrical codes and standards to ensure compliance and safety.
An information system generally consists of people procedures h and s?
A: People, Procedures, Hardware & Software
What is a VB procedure?
A procedure is a group of executable statements wrapped between a declaration statement and a matching End statement, the following are examples of valid VB procedures: Sub Function Event Handler Property Procedures Operation Procedures Generic Procedures E.g Private Sub ExampleProcedure() <Code> End Sub
What is an accepted method of isolating hazardous energy sources within a confined space?
Lockout/tagout procedures are commonly used to isolate hazardous energy sources within confined spaces. This involves physically securing energy isolation devices with locks and tags to prevent accidental re-energization of equipment. Additionally, proper training for workers on lockout/tagout procedures is essential to ensure safety during maintenance or repair work.
How often does the USF require authorized workers to be retrained in LOTO procedures?
every year (annually) and/or whenever there are changes in the USAF lockout/tagout energy-control procedures and/or inspections that reveal inadequacies in the worker's knowledge or use of energy-control procedures
What describes an authorized worker in the lockout tagout program?
ensure that their locks and tags remain in place during their part of the lockout/tagout procedure
What chapter in afosh 91-501 is lock out?
Lockout procedures are discussed in Chapter 13 of AFOSH 91-501. This chapter provides guidelines and requirements for implementing lockout/tagout procedures to control hazardous energy sources and prevent unexpected startup of equipment during maintenance or servicing.
With respect to lockout tagout Independent verification is?
an action performed by a second authorized worker that requires checking the position of an energy-isolating device for the application or removal of a lockout/tagout.
What application is the color magenta associated with in lock out tagout?
radioactivity
Is the codes for breast procedures indicate bilateral procedures true or false?
Tru/False the code for breast procedure indicate bilateral procedures.
Transurethral procedures are found in the urethra subheading?
true
What are the Lock out Tag Out procedures must have four elements?
Lockout Tagout (LOTO) procedures must include four essential elements: Preparation involves identifying the equipment and understanding the hazards; Lockout/Tagout requires applying locks and tags to energy-isolating devices to prevent accidental re-energization; Verification ensures that the equipment is properly isolated and that no energy sources are active; and Release outlines the steps for safely removing locks and tags once maintenance is complete, ensuring all personnel are informed before re-energization. These elements are crucial for ensuring worker safety during maintenance activities.
How many ways can you get out in a baseball game?
strikeout, groundout, flyout, tagout
Who reviews and approves lockout or tagout programs at USF installations?
ground safety
Whose responsibility is it to conduct lockout tagout program assessments?
Ground Safety
