Power = 600/30 = 20 watts
Power = V x I
V = Power/I = 20/2 = 10 volts
The Ampere is the unit of electric current. It depends upon a voltage in order for it to occur, and the Volt is that unit. The Ohm is the unit of resistance and represents the difficulty of moving the electrons by the voltage.
Voltage is related to energy by charge. Power equals voltage times current (amperes), and energy equals voltage times charge (coulombs).An ampere is 1 coulomb of charge moving per second.A watt (power) is 1 joule of work done (or energy transferred) per second.
There are lots of different units for electricity, depending what aspect you want to measure (power, energy, current, voltage, frequency, etc.).For a power plant, some relevant units include: * Volt, for voltage * Ampere, for current * Watt, for power * Hertz, for frequency
The ampere, often abbreviated as "amp," is a unit of electric current in the International System of Units (SI). In the context of a dynamo, which is a device that converts mechanical energy into electrical energy, the ampere measures the flow of electric charge produced by the dynamo. The amount of current generated depends on factors such as the dynamo's design, speed, and the strength of the magnetic field. Therefore, the specific ampere output of a dynamo can vary widely based on these conditions.
Not enough information. Power = current x voltage. Since voltage can be anything, there is no way to calculate power. Time is irrelevant; though once you have the power, it can help you calculate energy (energy = power x time).
The number of Ah (ampere-hours) or milli-ampere-hours tells you NOTHING about the voltage. It is the amount of current (amperes), multiplied by the time such a current can be extracted from the battery.If you multiply the number of Ah by the voltage, you will get the energy stored in the battery.
Voltage is the amount of energy in each coulomb of charge that passes through the battery. This means that the energy is the voltage times the time-integral of the current. For a constant current: E = V I t Where E = Energy in Joules V = Voltage in Volts I = Current in Amps t = time in seconds
The Ampere is the unit of electric current. It depends upon a voltage in order for it to occur, and the Volt is that unit. The Ohm is the unit of resistance and represents the difficulty of moving the electrons by the voltage.
You really can't compare that. * Ampere-hour is a unit of energy. If you multiply ampere x hours x voltage (the voltage is implied), you get energy. * kVA is a unit of power. Note that power is energy / time.
Voltage is related to energy by charge. Power equals voltage times current (amperes), and energy equals voltage times charge (coulombs).An ampere is 1 coulomb of charge moving per second.A watt (power) is 1 joule of work done (or energy transferred) per second.
Energy is measured in the SI unit Joule. One definition of a Joule is one ampere passing through a resistance of one ohm for one second. Thus doubling the electrical current (amperes/amps) passing through a resistance of one ohm for one second will double the energy. As for voltage, given that voltage (volts) = current (amps) times resistance (ohms) then, assuming a constant resistance, the voltage will double if the current doubles. Thus doubling the voltage (and therefore the current) passing through a resistance of one ohm for one second will double the energy (joules).
I am not sure what you mean, but ampere is a unit of current, not of energy. In the case of a constant current, if the current is 1 ampere in a second, it will be 1 ampere in an hour, or in a day.
You can't. If you know the voltage (volts) and current (amperes), you can convert to power (watts), but power is not energy. Power is the rate of energy (joules per second). You need to know the time as well to determine energy.
You can't convert that directly. kWh is a unit of energy; ampere is a unit of current.
For DC: power (in watts) = current (in ampere) x voltage (in volts). Energy = power x time, so energy = current x voltage x time (time in seconds). For AC, a power factor may have to be included (the cosine of the angular displacement between current and voltage). This is often near one, but it may be less.
You can't convert amperes to ampere-hours, for the same reason that you can't (for example) convert kilometers to kilometers per hour, meters to square meters, etc. Those are, quite simply, incompatible units. An ampere is a unit of electrical current; an ampere-hour is really a unit of energy: the energy stored when a current of 1 ampere flows during one hour. To actually be an energy unit, a voltage must be assumed; this is usually 12 volt for a car battery.
Voltage is electrical pressure, in joules per coulomb. One volt across one ohm will yield a current of one ampere, which is coulombs per second. One volt, producing one ampere, will yield one watt, which is joules per second.