0
What else can I help you with?
What is the cable size of 110 KW motor?
The cable size depends on a few factors, such as the supply voltage, the method of starting the motor, (direct-on-line, or star delta) and the length of cable required to compensate for voltage drop. Also, if the cable is copper or aluminum.110 kW motor has a rated current of 200 amps at 415 volts, so the correct copper cable size would have a cross-sectional area of 75 square mm., if the motor is started direct-on-line.At 660 volts, the rated current would be 118 volts and the cable size would be 35 square mm.
Which size of copper cable in mm should use for 90kW 440V 3phase 50Hz motor and can you know how is calculate?
cable size for the 90kW motor is 3CX150sqmm aluminum cable
What is cable size for 3 110kw 3 phase induction motor 100 meter run for cable 400v?
first calculate the full load amps of the motor by using formula, line amps = KW * 1000 / (line volts*1.732*P.F) Of the mentioned motor the amps will be 96 amps at the P.F 0.8. The motor will have star delta starter so the cable size would be 2 runs of 3c x 70 sq mm AL if laid in air.
What is the cable size for 7.5 kw 3 phase motor?
Assuming it is a 400 V three-phase motor, the phase current is 11 amps, or more if the power factor is less than 1.0 (or the supply voltage is different). If it is a 400 V motor the cable should be capable of carrying 16 amps, so a 2.5 mm-sq 4-core cable is needed.
What is the armour cable size for 45kw 3phase ac motor 2965rpm?
At 2965 rpm it sounds like an induction motor for a 50 Hz supply. A 45 kW motor would draw about 55 kW from the supply with a power factor of 0.85, so that is 65 kVA, and on a 415 v 3-phase supply that is a current of 90 amps. For armoured XLPE cale the size needed is at least 16 mm2 Probably 25 mm2 would be preferred for a permanent installation but it would depend on how the cable is installed, how much free air movement there is around it etc.
What is the effect of long armoured cable used for star delta starter for 3 phase ac motor?
voltage drop is be a problem.
What is the cable size of 110 KW motor?
The cable size depends on a few factors, such as the supply voltage, the method of starting the motor, (direct-on-line, or star delta) and the length of cable required to compensate for voltage drop. Also, if the cable is copper or aluminum.110 kW motor has a rated current of 200 amps at 415 volts, so the correct copper cable size would have a cross-sectional area of 75 square mm., if the motor is started direct-on-line.At 660 volts, the rated current would be 118 volts and the cable size would be 35 square mm.
Which size of copper cable in mm should use for 90kW 440V 3phase 50Hz motor and can you know how is calculate?
cable size for the 90kW motor is 3CX150sqmm aluminum cable
What is cable size for 3 110kw 3 phase induction motor 100 meter run for cable 400v?
first calculate the full load amps of the motor by using formula, line amps = KW * 1000 / (line volts*1.732*P.F) Of the mentioned motor the amps will be 96 amps at the P.F 0.8. The motor will have star delta starter so the cable size would be 2 runs of 3c x 70 sq mm AL if laid in air.
How much copper is in a treadmill motor?
how much copper in 250 hp motor
What is the cable size for 7.5 kw 3 phase motor?
Assuming it is a 400 V three-phase motor, the phase current is 11 amps, or more if the power factor is less than 1.0 (or the supply voltage is different). If it is a 400 V motor the cable should be capable of carrying 16 amps, so a 2.5 mm-sq 4-core cable is needed.
What is the armour cable size for 45kw 3phase ac motor 2965rpm?
At 2965 rpm it sounds like an induction motor for a 50 Hz supply. A 45 kW motor would draw about 55 kW from the supply with a power factor of 0.85, so that is 65 kVA, and on a 415 v 3-phase supply that is a current of 90 amps. For armoured XLPE cale the size needed is at least 16 mm2 Probably 25 mm2 would be preferred for a permanent installation but it would depend on how the cable is installed, how much free air movement there is around it etc.
Is motor oil compatible with copper pipe?
Yes, Motor oil will not damage copper.
How do you calculate cable size for 50 hp?
just apply the formula :-p=v*i*cos(angle);now you have the power rating,load so in turn power factor so you can easily calculate the value of current.with the help of current you can chose the cable available in the market either the aluminum or copper wiresatendra.svnit@gmail.com
How do you adjust clutch cable down on the motor for a 1987 GL1200?
There is no cable. Just a slave at the motor. No adjustments. Hyd. system
How much copper in 250 hp motor?
The amount of copper in a 250 horsepower (hp) motor can vary based on the motor's design and efficiency. Generally, a 250 hp motor may contain approximately 100 to 200 pounds of copper, primarily in its windings and rotor. Factors such as the motor type (induction, synchronous, etc.) and construction materials can influence the exact copper content.
How do you calculate copper in dc motor?
Copper is not something that is calculated. The amount of copper might be, or copper losses / load losses, might be, but "copper" is not calculated.
