Iron and Aluminum
There are many man-made materials. Two of them include plastic and paper. Plastic and paper is used for everything from soda containers to toothbrushes and paper is used for wrapping, containers, and in business.
Gyprock is made of gypsum plaster (made from calcium sulfate dihydrate) that has been pressed between two thick sheets of paper (sometimes made with fiberglass instead of paper to prevent mold growth), then kiln dried.
For example the cause of sliding friction of two materials is when the stress between the Materials is not equal to zero
External diameter minus internal diameter will get you the difference and then you have to divide by two to get the wall thickness. (as the difference in diameter accounts for both sides of the cylinder)
A composite is any material made of more than one component. Polymer composites are composites made from polymers, or from polymers along with other kinds of materials. For more information, see the Web Links to the left of this answer.
There are two cylinder heads on a V6 3.1L engine.
The Commodore is made of cast iron and both use two-valve-per cylinder iron heads. The engine was used in the 1991 second series by Heldon.
Yes, but pay attention to the induction system. If the 5.7 is injected, you will have to accomodate. And, these two motors have different type cylinder heads, if the 5.7 was made after 88.
stock heads, two. some aftermarket heads are made for 4.
There is one spring for each valve, if there are two intake and two exhaust valves per cylinder there will be twice as many springs per cylinder compared to an engine with one intake and one exhaust valve per cylinder.
A single overhead camshaft engine can have either one or two cylinder heads. The "single" indicates the number of camshafts per head, not the total number of camshafts.
A cylinder
The knock sensor are located in the valley between the cylinder heads on V6 and V8 engines V8s have two knock sensors
polaris
Lipids and Protein i think(:
sand and bricks
Concrete and steel.