answersLogoWhite

0

What else can I help you with?

Continue Learning about Engineering

What gate can be used to constructed full adder?

A full adder can be constructed using basic logic gates: XOR, AND, and OR gates. Specifically, two XOR gates are used to calculate the sum, while two AND gates and one OR gate are employed to determine the carry-out. The first XOR gate takes the two input bits, and the second XOR gate incorporates the carry-in. The AND gates handle the carry generation, with the OR gate combining the outputs to produce the final carry-out.


Can DTL logic work with TTL logic?

Yes, standard 5V powered DTL and TTL devices are fully input/output logic level and fanout compatible. However DTL chips are nearly impossible to find today. The only thing to be careful about is old DTL based designs often used wired-and gates (i.e. directly tying outputs of several gates together to reduce part count). You cannot do this with normal TTL!


Which of the logic gates would detect if the inputs are different?

The XOR (exclusive OR) gate detects if the inputs are different. It outputs a high signal (1) when the inputs are not the same (one input is high and the other is low) and outputs a low signal (0) when the inputs are the same. Thus, it effectively identifies the difference between the two inputs.


How do you convert a 4 input NOR gate into multiple 2 input NOR gate?

you will need 2 two input AND gates to do this. connect the output of the first to one input of the second. you now have a three input AND gate. just remember when calculating timing that 2 inputs of the 3 have twice the gate delay of the remaining input, thus the output will have skew and possibly glitches. if timing is critical or glitching can't be tolerated it may be best to use an actual three input AND instead of kludging one.


Why is Bill Gates name gates?

His last name is Gates, because Gates is his family's name. His last name Gates comes from his ancestors.