0
What else can I help you with?
What inches you can weld with one electrode?
It varies from 3 inches to 13 inches. The electrode type, type of weld, and position of weld all determine how far you can get done with a single rod
What meter is best to check the earthing system?
1.take 2 wire and connect with a bulb holder along with a bulb 2. then put the two open ends to the plug, one in the live line and another end to the neutral end 3. switch on the supply & check brightness 4.switch off supply & plugged out wire from neutral end & put it into earthing point 5. switch on the power, check brightness ,if it is same as before then EARTHING is very good if not then there is a problem with the earthing point
How many inches is a trap seal?
there are 100 inches in a trapseal
How do I write a program that inputs the length of two pieces of fabric in feet and inches as whole numbers and prints the total?
#include <stdio.h> int main (void) { unsigned f1, i1, f2, i2; scanf ("Enter the 1st length in feet and inches: %u%u", f1, i1); scanf ("Enter the 2nd length in feet and inches: %u%u", f2, i2); unsigned inches = i1 + i2 + (12 * (f1 + f2)); // sum the inches (convert feet to inches) unsigned feet = inches / 12; // convert inches to feet inches %= 12; // determine the remaining inches printf ("The total length is %u feet %u inches.\n", feet, inches); return 0; }
How many inches long is a foot and a half of rope?
Well, honey, a foot and a half is 18 inches long. So, that rope would be 18 inches. Math doesn't have to be complicated, darling.
What is the standard dept of an electrical earthing pit?
A plate electrode can be installed at a minimum of 24 inches (600mm).
How can a grounding rod and wire be properly installed to ensure electrical safety?
To properly install a grounding rod and wire for electrical safety, follow these steps: Choose a location outside the building where the rod can be driven into the ground. Drive the grounding rod into the ground until only a few inches are above the surface. Connect the grounding wire to the rod using a clamp or connector. Run the wire from the rod to the main electrical panel, ensuring it is securely attached. Make sure the wire is properly insulated and protected from damage. Test the grounding system to ensure it is working effectively.
What inches you can weld with one electrode?
It varies from 3 inches to 13 inches. The electrode type, type of weld, and position of weld all determine how far you can get done with a single rod
How many electrodes are used per inch of weld?
depending on: the type of electrode, and gap between material, and material thickness, and whether or not the groove is beveled... roughly 1 electrode per 8 inches for a cover pass, and 1 electrode per 16 inches for a root pass
How do I properly install a grounding rod for electrical safety?
To properly install a grounding rod for electrical safety, follow these steps: Choose a location outside your home where the rod can be driven into the ground. Use a grounding rod made of copper or copper-coated steel. Drive the rod into the ground vertically until only a few inches are above the surface. Connect a grounding wire from the rod to the main electrical panel using a grounding clamp. Ensure the wire is securely attached and that the connection is tight. Test the grounding system to ensure it is working properly and providing safety for your electrical system.
What is the minimum space required for a toilet and sink to be installed in a bathroom?
The minimum space required for a toilet and sink to be installed in a bathroom is typically around 30 inches by 60 inches.
How high are outlets typically installed from the floor?
Outlets are typically installed about 12-18 inches above the floor.
What is the standard height of a bathroom vanity and how high is it typically installed?
The standard height of a bathroom vanity is around 32 inches. It is typically installed at a height of 30-36 inches from the floor.
What is the minimum depth that the soil stakes have to be driven into the soil?
36 inches
How far from the wall should the toilet drain be installed?
The toilet drain should be installed about 12 inches away from the wall.
How deep is the sod typically installed in a residential lawn?
The sod in a residential lawn is typically installed at a depth of about 1 to 2 inches.
What is the optimum installed Shower Head height?
72 inches from tub floor.
