Current flows in a circuit when there is a difference in electronic potential between two points.
A series circuit is where there is only one path for the current. As a result, and as a direct consequence of Kirchoff's current law, the current at every point in a series circuit is the same. The two bulbs have the same current flowing through them.
Current stops flowing.
No. Circuit is open but still HOT.
You know if current is flowing in a bulb circuit because, if there is enough power (voltage times current), the bulb will illuminate. If there is current, but not enough power to illuminate the bulb, you will need to measure the current with an ammeter to see if there is any current.
A fuse.
Then the current will stop flowing.
A break in the wires of an electric current will break or cut the circuit and stop the current from flowing.
The function of a fuse is to stop the current from flowing by opening the circuit when the circuit amperage exceeds the rating of the fuse.
The current flowing in an electrical circuit.
Resistors in a circuit reduce the flow of current by impeding the movement of electrons. This causes a decrease in the overall current flowing through the circuit.
A Galvanometer can be used to detect the presence of current in a circuit. An ammeter can be used to know the magnitude of the current flowing through the circuit.
A closed circuit is one where the current is flowing continuously from the source to the load and back to the source, completing a loop. An open circuit, on the other hand, is one where the current cannot flow because the circuit is broken at some point.
amperes or A.
Correct Answer= "the current will increase"
false
An ammeter measures the amount of current flowing in a circuit
If the resistor is removed from the circuit, the total resistance in the circuit decreases. This causes the total current in the circuit to increase, which would result in an increase in the ammeter reading.