0
What else can I help you with?
How do you use a g clamp safely?
justine haha
Which component is used to measure the current in a circuit?
an ampmeter. Most DVM's have them, or you can use a clamp on style.
Who invented the clamp?
It is so old that no one today knows who made the first clamp.
A clamp on ammeter measures?
Measures current by magnetic field induced into the clamp. You need to clamp a single conductor. For example you couldn't just clamp a lamp cord since it has two conductors and the current is going in opposite directions and the fields cancel each other out.
How do I use a clamp on amp meter?
Answer 1When electrical current flows through a wire [or any conductor[, it creates an electromagnetic field which the clamp on Amp meter is disigned to detect and quantify. The meter loop is hinged and movable in order to open the loop to allow the loop to be placed "around" a single conductor. It is important that the loop be placed around only one conductor as if there is more than one wire conducting, then the fields from multiple wires will interfere with the meters ability to operate.The meter will have a switch [usually rotary] to change scales, and unless you know the approximate current flowing through the circuit, you should first set the meter to the highest current scale setting, and then switch to lower current scales until the proper one is found.
What is the use of a buret clamp?
to clamp the buret
What s the use of a clamp in science?
the use of clamp is science is : Doctor Simon says that they are healthy.
Use of burette clamp?
To clamp one in to keep it right up.
How can I remove a PEX clamp?
To remove a PEX clamp, use a clamp removal tool or a pair of pliers to squeeze the tabs on the clamp together, then slide the clamp off the PEX tubing.
What is the use of clamp with pulley?
The clamp on a pulley looks like a shackle that you see on the end of a chain if the pulley is stainless steel with a clamp on it you can use for flagpoles if there is a hole at the top of the pole that is what the clamp on the pulley is for to clamp it into place it will never rust or fall off whatever rope you use make sure it has lasting longevity and it won't snap or break
What is the use of clamp iron?
The iron clamp is used to fix laboratory glassware on the rod stand.
How can I efficiently remove a PEX clamp?
To efficiently remove a PEX clamp, use a pair of PEX clamp removal tools or a pair of adjustable pliers to squeeze and release the clamp's tabs. Then, slide the clamp off the PEX tubing.
What is the best type of hose clamp to use for securing a dryer vent in place?
The best type of hose clamp to use for securing a dryer vent in place is a stainless steel worm gear clamp.
When Changing the brakes on a 2005 Outback do you use a C Clamp or do you have to screw the calipers back?
you can use the c clamp just tighten it slowly
How-to use the clamp-on meter Model GCM-600?
how to use the Clamp-On Meter Model GCM-600 to find the current of a DC power?
How to use a cable clamp effectively?
To use a cable clamp effectively, first, identify the size of the cable and select a clamp that fits securely. Place the clamp around the cable and tighten it using a screwdriver or wrench until it is snug but not overly tight. Make sure the clamp is positioned securely and does not damage the cable. Check the clamp periodically to ensure it remains secure and adjust as needed.
How can I remove a PEX clamp efficiently?
To efficiently remove a PEX clamp, use a clamp removal tool or a pair of pliers to squeeze the tabs on the clamp together, allowing it to be easily removed from the PEX tubing.
