answersLogoWhite

0

It depends on the application. Vacuum tubes work better under certain operating conditions and frequencies. The problem with vacuum tubes is they are not as easy to mass produce as semiconductor devices, and semiconductor devices such as integrated circuits can have litterally thousands or millions of transistors and other components on a single chip. Such scaling is not possible with vacuum tubes, though there is some research in the MEMS (Micro Electro Mechanical) field to suggest that micro scale vacuum tubes could be mass produced within an integrated circuit. Such applications could be useful in the Terahertz frequencies.

When a lowcost and compact solution is preferred generally the silicon based microchips will be the best option.

User Avatar

Wiki User

14y ago

What else can I help you with?

Related Questions

What computer component did the transistor replace?

the vacuum tube


What characteristics made the transistor better than the vacuum tube?

There were obvious differences between the trasisitor and the vacum tube. The transistor was faster, more reliable, smaller, and much cheaper to build than a vacuum tube. One transmisor was the equivalent 40 vacuum tubes. They also didn't produce heat compare it to a vacuum tubes. Conduct electricity faster and better than vacuum tubes.


What are the elements of a vacuum tube?

A vacuum tube is simply a tube with no oxygen nor carbon dioxide in it (aka no air).


What is in a vacuum tube?

Millman's theorem


Where was vacuum tube was made?

who made the vacuum tubes


Do vacuum tubes in computers burn out like light bulbs?

Yes, vacuum tubes in computers burn out. Transistors are much better. Vacuum tube computers no longer exist except in museums. Vacuum tube computers were originally made in World War 2 to calculate the positioning of antiaircraft guns. It was not necessary to know where the airplane was but where it would be when the explosive arrived. That was especially true when the Germans developed the buzz bomb going 450 miles an hour. When hundreds of transistors could fit in the same area as one vacuum tube, the vacuum tube vanished.


How many KB is a vacuum tube?

Kilobytes and vacuum tubes are not in the same category. At best, a twin triode vacuum tube is a single flip-flop and can hold 1 bit of information, making a vacuum tube about 0.000122 of a kilobyte.


What does vacuum tube mean?

an electron tube containing a near-vacuum that allows the free passage of electric current.


How many microliters will fill a micro tube?

A typical microcentrifuge tube, often referred to as a micro tube, usually has a volume capacity of 1.5 to 2.0 milliliters (mL). This translates to 1500 to 2000 microliters (µL). Therefore, to fill a micro tube, you would need approximately 1500 to 2000 microliters, depending on the specific tube used.


How does a vacuum tube work?

contains only a heated electron-emitting cathode and an anode. Electrons can only flow in one direction through the device—from the cathode to the anode. Adding one or more control grids within the tube allows the current between the cathode and anode to be controlled by the voltage on the grids.[5]


What are example of vacuum tube?

cellphone


What does the first generation vacuum tube look like?

* == 1st generation vacuum tube look like as a parallel electric bulb. _____ ----_____)