answersLogoWhite

0

  • electric motor
  • relay coil
  • speaker coil
  • speedup coil (in vacuum tube or discrete transistor digital logic)
  • etc.
User Avatar

Rusty Hahn

Lvl 10
3y ago

What else can I help you with?

Continue Learning about Engineering

What is non-inductive load?

non- inductive load is without motor and transformer loads are non-inductive load, purely resistive are capacitive loads phase angle is unity are leading PF A non-inductive load is a load whose current does not change instantaneously.


What is the difference between an inductive and a capacitive load?

Resistance load it means there is passive load to impede current flow. Inductive load means there is a coil as a load while still a passive it has its own characteristics which differs from a resistive load which is linear while inductive is not linear load


What will happen when diesel genertor set run on more inductive load?

There is no problem using a generator to run more inductive load so long as the generator capacity can supply the needed power to the inductive loads. The inductive loads should not be switched on at the same time but there should be a little delay before another load is switched ON as inductive loads draw more power at start ON. The power factor of the inductive loads also affect the generator, hence for safe operation a power factor that is approaching 1 is desirable. Ogu Reginald Ekene


What is the phase angle difference between inductive load and resistive load?

The phase angle is defined as the angle by which the load current leads or lags the supply voltage.For a purely-resistive load, the phase angle is zero, because the load current is in phase with the supply voltage.For a purely-inductive load, the phase angle is 90 degrees lagging.But few loads are either purely-resistive or purely-inductive; typically, most loads are resistive-inductive. This means that, typically, the phase angle lies somewhere between zero and 90 degrees.


How do you use electric power in inductive load?

The actual energy consumed in load is inductive load

Related Questions

What is non inductive load?

non- inductive load is without motor and transformer loads are non-inductive load, purely resistive are capacitive loads phase angle is unity are leading PF A non-inductive load is a load whose current does not change instantaneously.


What is non-inductive load?

non- inductive load is without motor and transformer loads are non-inductive load, purely resistive are capacitive loads phase angle is unity are leading PF A non-inductive load is a load whose current does not change instantaneously.


What is the difference between an inductive and a capacitive load?

Resistance load it means there is passive load to impede current flow. Inductive load means there is a coil as a load while still a passive it has its own characteristics which differs from a resistive load which is linear while inductive is not linear load


What will happen when diesel genertor set run on more inductive load?

There is no problem using a generator to run more inductive load so long as the generator capacity can supply the needed power to the inductive loads. The inductive loads should not be switched on at the same time but there should be a little delay before another load is switched ON as inductive loads draw more power at start ON. The power factor of the inductive loads also affect the generator, hence for safe operation a power factor that is approaching 1 is desirable. Ogu Reginald Ekene


Fan is inductive load or resistive load?

A fan is typically considered an inductive load due to the presence of the motor within it. Inductive loads, such as motors, create magnetic fields when current flows through them, which can cause a phase shift between voltage and current. This phase shift results in a lagging power factor, which is a characteristic of inductive loads. Resistive loads, on the other hand, have a power factor of 1 and do not cause phase shifts.


What is the phase angle difference between inductive load and resistive load?

The phase angle is defined as the angle by which the load current leads or lags the supply voltage.For a purely-resistive load, the phase angle is zero, because the load current is in phase with the supply voltage.For a purely-inductive load, the phase angle is 90 degrees lagging.But few loads are either purely-resistive or purely-inductive; typically, most loads are resistive-inductive. This means that, typically, the phase angle lies somewhere between zero and 90 degrees.


What is the effect of an inductive or capacitive load under no load conditions?

A load of any type,,,inductive or capacitive , would effect the circuit even if THOSE "loads" had no load on them. They would still have a load effect on the circuit they are connected to.Answer'Under no-load conditions' means that no load is connected to the supply. So your question doesn't make sense!


Which home appliances have a resistive load and which home appliances have an inductive load?

water heaters electric stoves toasters space heaters incandescent lights are resistive loads a/c and fans iceboxs and anything with a motor is inductive Type your answer here...


What are inductive load?

Any devices that have coils of wire in there manufacture can be classed as inductive loads. e.g. motors, solenoids and contactor coils are a few. Example of resistive loads can be baseboard heaters, filament light bulbs, toasters and stove top elements.


How do you use electric power in inductive load?

The actual energy consumed in load is inductive load


Why is the PF of an induction motor low for light loads?

Induction motor by design is inductive load. Hence the PF tends to be lower


Ac inductive loads are rated in?

They are usually rated by their power factor. With 100 volts at 1 amp the load uses 100 watts maximum, in general it would be 100 watts times the power-factor.For example a small induction motor might have a PF of 0.7.AnswerIn practise, there are very few purely-inductive loads. Most are resistive-inductive, and rated according to their apparent power expressed in volt amperes. A purely-inductive load would be rated according to its reactive power, expressed in reactive volt amperes. No load is ever 'rated' according to its power factor.