nobody
When a circuit is in off condition then it is called an open circuit..
As load is conected in circuit , so thre is no open circuit therefore there would not be any open circuit voltage.
If the circuit was open, the tram's motor could not run!
An open circuit or a short-circuit (if that circuit is complete).
In order to illuminate the light, you need a closed circuit. It would be normally open, and closed to indicate that the door is open.
An open circuit is called open because the circuit has an opening, a disconnection. In other words, there is an open space in the circuit in which the electrons cannot move through.
An open circuit....
When a circuit is in off condition then it is called an open circuit..
As load is conected in circuit , so thre is no open circuit therefore there would not be any open circuit voltage.
If the circuit was open, the tram's motor could not run!
meaning that the current from your power source doesn't return to the positive end (electricity flows from - negative, to + positive)
When a plug key is open , the circuit is incomplete and is call open circuit.. To be continued..
a circuit which is open
If the lights are the load of the circuit, then the lights will be off if the circuit is open.
An open circuit or a short-circuit (if that circuit is complete).
Electric circuit was invented by Alessandro Volta in 1800.
Three ways a circuit can be made to be open are, blown fuse, open switch and open contact.