0
The calculated and measured voltages are typically similar due to the accurate application of Ohm's Law and the principles of circuit analysis, which account for the components' values and configurations. Additionally, high-quality measuring instruments minimize errors, and under ideal conditions, theoretical models closely represent real-world behavior. However, minor discrepancies can arise from factors like component tolerances, temperature variations, and measurement inaccuracies.
What else can I help you with?
Why potential difference at every point in parallel circuit is same?
Kirchof's Law - the voltages are measured between the same starting-point and end-point.
When a 10mA forward bias current and the voltages at the anode and cathode of a diode in a circuit are found to be the same what is the diode most likely to be?
With a 10mA forward bias current, if the voltages at the anode and cathode of a diode in a circuit are found to be the same, then the diode most likely to be shorted.
How are series circuits and parallel circuits the same?
They are not. They are connected differently, and the voltages and currents behave in different ways.
What causes generators in parallel with same voltages and KW to have different amps?
If they are at the same voltage, and the same kW, the only thing left that will influence the output amperage is the power factor the generator is running at.
How do you design a RC coupled bjt amplifier using pnp transistor?
same as you would using an NPN, except the supply voltages are reversed
Why potential difference at every point in parallel circuit is same?
Kirchof's Law - the voltages are measured between the same starting-point and end-point.
In parallel ckt voltages are same?
yes
Line to line voltage?
The conductors between a three-phase supply and a three-phase load are called line conductors not phase conductors, and the voltage measured between them are line voltages, not phase voltages. In the case of a delta supply, the line voltages are numerically equal to phase voltages, but the name remains the same!I have to admit that many people call line conductors 'phase conductors', but many people also say 'irregardless' -that doesn't make it a real word!!
What is the equation for determing density?
The density (d) to be determined can be calculated by the formula: d = mass / volume , both measured from the same amount of matter.
Do you measure a tsunami in voltages?
What you're probably thinking of is the ML scale which measures "potential energy" of the tsunami. Don't get this confused with electrical potential (or voltage). they are not the same. the "potential energy" of a tsunami, I would assume, would be measured in joules.
How many cubic units needed to fill the space inside a figure?
Its capacity or volume - measured in the same units.Its capacity or volume - measured in the same units.Its capacity or volume - measured in the same units.Its capacity or volume - measured in the same units.
What is the difference between joule of work and a joule of energy?
Technically, there is no difference because both are measured and calculated in the same way. The only difference is how they occur or appear in nature.
Is truck mileage measured the same as car mileage?
Yes. mileage is measured the same in all vehicles.
Is the national grid In UK the same as us?
No. The two run at completely different voltages.
How is temperature measured in Pakistan?
In the same way as it is measured everywhere else!
Is the current measured in amps the same as the keyword "amps"?
Yes, the current measured in amps is the same as the keyword "amps."
Can a 20 VA rated transformer be used in place of a 10VA?
Yes provided the voltages are the same.
