0
What else can I help you with?
Why reducers are used before and after pressure control valve in piping control station?
reducers are used to improve flow control in a steady nature because when the fluid flow through the pipe there is turbulence in flow. due to turbulence in fluid it effect to measuring devices which vary in readings, to avoid such it need to contract the area of the pipe in shape of reducer is at upstream of the control valve and down stream of the control valve there is expander which helps to fluid to flow in regular size of it.
Why do you need the steam engine?
because the steam is very importance in main engine
Why do the pipes in a steam heating system need to be insulated?
The pips in a steam heating system need to be insulated to prevent condensation. Condensation can lead to mold and or freezing of the steam pipes in the winter.
Why are you losing water pressure throughout your house?
1) Clogged up lines from sedimentary/hard water build up. 2) Loss of air pressure through relief valve or the air volume control. To fix 1, you need to drain tank and clean it and that's just from what I've read. To fix 2, you need to tighten relief valve, but not to tight as you do need some air to escape as your tank fills with water. Air volume control is what I'm having to replace now, it's about a $25 part.
What fuel does a steam train need to work?
Coal or wood
Is my water softener bypass valve leaking and how can I fix it?
If your water softener bypass valve is leaking, you can fix it by checking for loose connections or damaged seals. Tighten any loose connections and replace any damaged seals. If the leak persists, you may need to replace the bypass valve.
Where is the vacuum control Valve located on a 2002 Ford Explorer?
Need to know which one you are looking for or, what does this vacuum control valve control.
Does half life 2 episode 2 need steam?
Yes, any game published by Valve requires that you use their content service, Steam.
Download steam for left for dead?
you need steam to launch Left for dead just like any other games from Valve... www.steampowerd.com get it from here and make accout if you need help add me on steam im ash-bee
What is code P1443 on 1997 Ford Escort?
Evaporative Emission Control System control valve malfunction. You need a new evap control surge solenoid valve.
How do you get left 4 dead demos?
You will need to download Valve's content distributor, "Steam" in order to get a demo of Left 4 Dead, or any other upcoming Valve game.
What part do you need to repair code P0505 idle control malfunction on a 1996 240SX?
you might check your IAC valve (idle air control valve) check your TPS
How do you troubleshoot and fix issues with a steam radiator air valve?
To troubleshoot and fix issues with a steam radiator air valve, start by checking for any blockages or debris in the valve. If there are no visible obstructions, try adjusting the valve to see if that resolves the issue. If the problem persists, you may need to replace the air valve with a new one. Make sure to turn off the steam supply before attempting any repairs. If you are unsure or uncomfortable with fixing the issue yourself, it is recommended to contact a professional plumber or HVAC technician for assistance.
Is ball valve rating of 150 wsp and 500 wog good for 260 psi?
Type your answer here... 150 wsp means 150 pounds working steam pressure, and 500 wog means water oil gas, there is a temperature limit on the valve, typically 200degrees Fahrenheit. The steam maximum for the valve with the 150 wsp is 150 pounds per square inch. When you ask if the valve is good for 260 psi, you need to ask if it is water, oil or gas, BUT not steam. 150 wsp is maximum 150 pounds of steam pressure.
How To fix p1443 evaporative emission control system - vacuum system - purge control solenoid or purge control valve fault in Chevrolet Epica LT 2004?
If it is the valve on top of the fuel tank, it weel need to be replaced.
What does the idle air control valve do?
An idle air control valve (iac) allows the flow of air into the intake to be mixed with fuel while the vehicle is at an idle. when you open the throttle the valve does not need to work because the air is coming from the air box hence the name idle air control
How do you calibrate control valve?
By using calibrator we can easily calibrate, just we need a air line having pressure of 6 kg as input of control valve. for example : 4mA control valve in close postion 8mA 25% open 12mA 50% 16mA 75% 20mA 100%
