In an electric circuit, intensity (current) and tension (voltage) are interconnected through Ohm's Law, which states that voltage equals current times resistance (V = IR). When resistance changes, it directly affects the current flowing through the circuit; increasing resistance typically reduces current, while decreasing resistance allows more current to flow. Consequently, the voltage across the circuit components must adjust to maintain the relationship defined by Ohm's Law, leading to changes in both intensity and tension. This interplay ensures that the overall energy distribution in the circuit remains consistent.
it has only very litle tension resistance.
Actually ACB isused for Low Tension side and VCB is used for High Tension Side..Chappa matter
There are different forces on a materials such as Compression and Tension. Compression is pushing a material together. Tension is pulling a material apart. Concrete has good strength in Compression, but is weak in Tension. The steel reinforcement improves the resistance to tension of the concrete.
No a integrated circuit IC for short is solid state and can only be destroyed by reverse polarity or shortened output or to high input tension or current No a integrated circuit IC for short is solid state and can only be destroyed by reverse polarity or shortened output or to high input tension or current
High-voltage conductors are circular to evenly-distribute the electric field that surrounds them in order to prevent breakdown.
Sometimes we are (high tension lines) - but it weighs too much and has too high a resistance for "normal" use.
yes.due to the surface tension ,there is liquid offer resistance.
bulk oil circuit breaker
There are 2 different types of these devices: circuit breakers (which can be reset after the problem is fixed) and fuses (which must be replaced after the problem is fixed).
Temperature can affect the compression and tension of a rubber band by changing its elasticity. At higher temperatures, rubber bands become more flexible and stretchier, reducing their resistance to compression and tension. Conversely, at lower temperatures, rubber bands become stiffer and less stretchy, increasing their resistance to compression and tension.
Yes. Exercise actually relieves tension and reduces the intensity of cramps.
it has only very litle tension resistance.
Voltage or electric potential tension measured in units of electric potential: volts, or joules per coulomb) is the electric energy charge difference of electric potential energy transported between two points.
A resistor does not only decrease current in a circuit it can also reduce tension(voltage) if connected in series.
engine pulls the aircraft forward but air resistance tries to hold it back results in tension which tries to stretch..............2)bracing wires are subjected to tension
By touching an uninsulated conductor which is under electrical tension.
To build tension and intensity in a musical piece leading to a powerful crescendo, techniques such as dynamic contrast, rhythmic acceleration, harmonic tension, and instrumental layering can be used. These elements create a sense of anticipation and excitement, ultimately leading to a climactic crescendo that heightens the emotional impact of the music.