A: Nothing will happen if the load increases or even removed the voltage will go to the open voltage condition no harm.
The secondary load current will change. This, in turn, will cause the primary current to change (the primary current being the phasor sum of the [IS (Np/Ns)] and the primary current (Io).
Its performance becomes worse. The speed will drop more when a mechanical load is put on the shaft.
A: That will happen anytime the voltage source is not able to provide the power needed for the load. If the load exceed the power available from the source the voltage will be reduced as IR drop from the source
Bear the load. Bare the load would be to uncover the load...
Invade-a-Load happened in 1987.
Frequency is set by the supply, not by the load.
The answer to this question depends entirely on the country, state, province or city where you live. Please ask this question again and be sure to give the place you are interested in. For example: For how many hours does load shedding happen in Karachi? For how many hours does load shedding happen in Bangladesh? For how many hours does load shedding happen in Bangalore?
A: Nothing will happen if the load increases or even removed the voltage will go to the open voltage condition no harm.
It will just load your old saved data.
There is no load connected!
when source resistance and load resistance are equal maximum power is transfered
A sh1t load of mess
If a neutral breaks the load will cease to operate.
A river's suspended load and bed load may accumulate at the river's mouth and form a delta. It is a land form created by the deposition of sediments.
Vehicle will operate as if under heavy load.
I have experienced this problem. It may happen because Club Penguin has an error but does not want to load. It might also happen because there are lots and lots of people on line so again it will not load.