Hookes law says that stress, s, is proportional to strain,e, as
s = E e where E is modulus. Since strain has no units (it is deflection per unit length) the units of E are the same as s. E is the slope of the stress strain diagram.
Yes, indeed. Sometimes tensile modulus is different from flexural modulus, especially for composites. But tensile modulus and elastic modulus and Young's modulus are equivalent terms.
Young's Modulus (modulus of elasticity) describes the stress-strain behavior of a material under monotonic loading. The dynamic modulus of elasticity describes the same behavior under cyclic or vibratory loading.
The elastic modulus, also called Young's modulus, is identical to the tensile modulus. It relates stress to strain when loaded in tension.
I think you mean "What variables affect young's modulus". Obviously not an english major!
Young's modulus is stress/strain. So if the modulus is high, it means that the stress value is greater compare to that of the material where the modulus is low. or in other words, the strain is very less compared to that of the material having low Young's modulus. So it tells that, if a material has high Young's modulus, the material requires more load for deformation of shape (within elastic limit).
Yes, Young's modulus and elastic modulus are the same thing. They both refer to a material's ability to deform elastically under stress.
Yes, the elastic modulus is the same as Young's modulus. Both terms refer to a material's ability to deform elastically under stress.
Yes, Young's Modulus is the same as Modulus of Elasticity.
Yes, the modulus of elasticity is the same as Young's modulus.
Yes, indeed. Sometimes tensile modulus is different from flexural modulus, especially for composites. But tensile modulus and elastic modulus and Young's modulus are equivalent terms.
To find strain from stress in a material, you can use the formula: Strain Stress / Young's Modulus. Young's Modulus is a measure of the stiffness of a material. By dividing the stress applied to the material by its Young's Modulus, you can calculate the resulting strain.
To calculate strain from stress, you can use the formula: Strain Stress / Young's Modulus. Stress is the force applied to an object, while Young's Modulus is a measure of the stiffness of the material. By dividing the stress by the Young's Modulus, you can determine the strain, which is the amount of deformation the material undergoes in response to the stress.
The ratio between stress and strain is called the modulus of elasticity or Young's modulus. It represents the stiffness or rigidity of a material and is a measure of how much a material deforms under stress.
To calculate strain from stress in a material, you can use the formula: Strain Stress / Young's Modulus. Stress is the force applied to the material, and Young's Modulus is a measure of the material's stiffness. By dividing the stress by the Young's Modulus, you can determine the amount of deformation or strain the material undergoes under the applied stress.
Young's Modulus (modulus of elasticity) describes the stress-strain behavior of a material under monotonic loading. The dynamic modulus of elasticity describes the same behavior under cyclic or vibratory loading.
Young's modulus and elastic modulus are often used interchangeably, but there is a subtle difference between the two. Young's modulus specifically refers to the ratio of stress to strain in the elastic region of a material's stress-strain curve, while elastic modulus is a more general term that can refer to any modulus of elasticity that describes a material's ability to deform elastically under stress.
The Young modulus and storage modulus measure two different things and use different formulas. A storage modulus measures the stored energy in a vibrating elastic material. The Young modulus measures the stress to in still elastic, and it is an elastic modulus.