answersLogoWhite

0

Because there may be sewage in it, or worse. Call a plumber.

Floor drains and washing machine drains are often drained into sumps. Grey water from these sources will begin to smell if not regularly flushed with more water and pumped out. The best way to eliminate this is to seal the sump with a clear cover so you can view the water levels. This will also help with other potential indoor air quality issues like radon gas. I also recommend an inspection plug to allow for manipulating a stuck pump float. Also if you have flood in the basement pulling the plug will provide a quick drain for the water.

You can view a photo of a cover here...

http://www.indoor-air-health-advisor.com/radon-mitigation-system.html

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

Why does my sump pump smell like sewage during heavy rain or like now when the snow melts?

If you have a septic system the leach lines are running at capacity and the overflow may be following the stone to the drain lines around the home into the sump pit. I am working on a solution as we speak my house smells the same way. My plan is to run an inline vent fan into the lid of my sump and vent it through the wall like a dryer.


Can toilet cause sump pump clogging?

Yes. If the sump pump is used as a sewage lift station, objects going into the toilet (especially forign objects) can cause the pump to clogg. These pumps are usually referred to as sewage ejector pumps. If the sump pump is only used for stormwater runoff, and foundation drains, then no, the toilet is a separate system and would not affect it. These are referred to as sump pumps. Except in unusual circumstances, such as when a toilet overflows, and drains into the basement floor drains for instance, these are totally separate.


Why does your sump pump smell?

If your pump is not cycling often the water in the pit will be stagnant and can get a little smelly or if the water coming in from the ground has a natural odor to it (like sulphur)


What are the best practices for maintaining a sump pump sewage system to prevent potential backups and ensure efficient operation?

To maintain a sump pump sewage system effectively, regularly inspect and clean the pump, test it periodically, ensure proper discharge pipe installation, and consider installing a backup power source. These practices can help prevent backups and ensure the system operates efficiently.


What is the primary use of a float switch?

The primary use of a float switch is used in sump pumps for sewage. They help prevent water damage by measuring how full a sump pump is and when it needs to start pumping.


What are the key differences between an ejector pump and a sump pump, and how do they each function in managing water drainage systems?

An ejector pump is used to remove sewage from a basement or lower level of a building, while a sump pump is used to remove water that collects in a sump pit. Ejector pumps use pressure to push waste uphill to a sewer line, while sump pumps use a motor to pump water out of the pit and away from the building to prevent flooding.


What is Sump Pump Repair and why do I need it?

You would need a sump pump repair if the sump pump in your basement is not pumping out water. The purpose of a sump pump is to drain excess water that is part of your waterproofing system.


Drain gurgles when the sump pump runs?

That sounds like you have a good sump pump and it's really trying hard to get rid of excess water.


How to Remove smell from a basement sump pump well?

First scrub the wall of the sump pump (so as to get rid of existing buildout). Next, add one to two teaspoon of bleach (chlorine). This will kill the bacteria that causes the smell Damean I use large chlorine tablets that are for swimming pools, lasts a month.


How does a sump pump prevent water from flowing back into the sewer system?

A sump pump prevents water from flowing back into the sewer system by pumping excess water out of a sump pit or basin and directing it away from the house or building, usually towards a drainage system or a designated area. This helps to prevent flooding and sewage backups in the event of heavy rainfall or water accumulation.


What is the purpose of a sump pump vent and how does it contribute to the overall functionality of a sump pump system?

The purpose of a sump pump vent is to release air pressure from the sump pump system, allowing water to flow freely and preventing airlocks. This helps the sump pump operate efficiently by ensuring proper drainage and preventing clogs or malfunctions.


How do you stop a new gurgling in your kitchen sink after installing a new sewage sump pump?

Make sure the drain line and the vent are cleared. Noises like that are usually caused by either restricted flow or a plugged drain vent.