your starving the evaporator
No, the liquid (discharge) line is the high pressure side. The suction line is the low pressure side.
The diameter of the discharge line leaving the ac compressor would be smaller than the suction line, because the compressed gas in the discharge line is more dense.
suction line liquid line
Suction strainers offer front-line fluid filtration in the tank, used to prevent large particles of sediment, sewage, mud, or solids from entering suction port of drainage pumps.
The suction line is generally thicker than the liquid line in a refrigeration or air conditioning system. This is because the suction line carries low-pressure vapor from the evaporator to the compressor, requiring a larger diameter to accommodate the gas flow. In contrast, the liquid line transports high-pressure liquid refrigerant from the condenser to the expansion device, necessitating a smaller diameter. This design helps optimize efficiency and manage pressure differences in the system.
The suction line is the big one. This line should be cold when the unit is on. The small line is the liquid line.
The suction line will be the larger line going into the compressor.
A suction line is usually cold to the touch.
No, the liquid (discharge) line is the high pressure side. The suction line is the low pressure side.
The larger line is suction. The larger line is the suction side which should be on the right side of the compressor......
It is common practice to specify the pump suction line one size larger than the pump discharge line in order to increase the Net Positive Suction Head available (NPSHA) to the pump. A smaller suction line the same pipe size as the discharge line would result in more pressure drop in the suction line and reduce the amount of head available to the suction side of the pump. This in turn would result in an operating point closer to cavitation of the pump.
"What" on the suction line of an air conditioner indicates a problem?
The suction line connects the evaporator outlet and the compressor intlet. Low pressure refrigerator vapour is drawn from the evaporator to the compressor through this line.
A suction line filter is added to the system for a different purpose than the liquid line dryer. A suction line filter is added:A : to keep acidic oil in the system from working its way back into the new compressor.B because the suction makes the acid removal better.C because the suction line is cold and full of acid.D all of the above.
Big.
The system will not cool if it is low on refrigerant. Check the suction line and see if it feels cold and is sweating. The suction line is the larger of the 2 and is covered in black insulation. If it is not sweating or if it is warm to the touch, you are probably low on refrigerant. If you have to have refrigerant added more than once, it's a sure bet there is a leak in the system.j3h.
Between compressor suction and reversing valve,also called true suction.