In my opinion, Least count of Spring Balance is very less to measure valuable metal like Gold.
STELL
Spring Dividers are used for measuring distances between two points, transferring or comparing measurements directly from a rule, or for scribing an arc, radius, or circle. A spring divider consists of two sharp points at the end of straight legs, held apart by a spring and adjusted by means of a screw and nut. The spring divider is available in sizes from 3 to 10 inches in length.
Because Gold is too expensive or Gold isn't very strong. (MPa)
A spring apparatus is often used to figure out the force constant of a spring. It has a ruler, spring (with a circular platform to add masses on) and a needle (place at 0 on the ruler). Because force and distance are directly proportional, as you add masses and see the distance on the ruler you can easily figure out the force constant with the equation Fe = kx , where Fe = FG = mg
hey people, if you see this that means your looking for what is gold and silver used for well i dont know so yea. i did this just for fun
Assayers often used a double pan balance to weigh gold samples.
A spring balance is not as accurate as a triple beam balance but it is simpler to use, and less expensive. For many purposes, it provides sufficient accuracy. When you weigh yourself, you want to know how many pounds or kilograms you weigh, but you don't really need to know with an accuracy of a tenth of an ounce, or a gram (depending upon which system of measurement you are using).
check zero error of spring balance note the readings of spring balance at eye level
spring balance is used to measure the weight possessed by an object.
A spring balance is a weighing device that utilizes the relation between the applied load and the deformation of a spring. It is widely used commercially.
The quantity of a spring balance refers to the number of spring balances being used or purchased. It is simply a count of the individual devices.
No it is not.
Both a spring scale and a balance are used to measure weight. They both rely on the force of gravity acting on an object to determine its mass. Additionally, both devices provide numerical readings to indicate the weight of an object placed on them.
spring balance
A spring balance is used in science to measure the weight of an object by the extension or compression of a spring. It provides a simple and accurate way to measure forces, such as gravity acting on an object.
1. Use a small balance scale ( like the one at the post office or the hardware store by the grass seed.)2. Use a yardstick, balance it in the middle, then to weigh one pound of gold, put a 1 pound (known)weight on one end, add gold to the other side until the sides are level.Then you have measured out exactly one pound of gold!Answer:The problem with weighing a pound of gold on common scales is that, if you wish to weigh it in ounces, you have to weight it in Troy ounces not Avoirdupois ounces. An Avoirdupois ounce (used for meat, butter, or non-precious metals) contains 28.349 g each, while a Troy ounce (used for precious metals) is 31.103 g. To make things more confusing there are 12 ounces in a Troy pound and 16 ounces in Avoirdupois pound. If using a scale (either a balance or a spring scale) it is better to measure in grams.
No it is not.