0
In a typical steam system, steam is directed to the condenser instead of the boiler to remove heat and condense it back into water for reuse. Sending steam to the boiler would be inefficient, as it would require additional energy to convert the water back into steam again. The condenser allows for heat recovery and improves the overall efficiency of the system by recycling the condensate. This process also helps maintain optimal operating conditions and reduces water consumption.
What else can I help you with?
Why steam is to be condensed in thermal power plant Y should not you use a compressor to suck compress and send back the steam at high pressure?
It's a matter of the steam cycle, the condenser in a condensing power plant creates a vacuum, or low pressure zone for the steam to flow into. A compressor would need to compress this steam 650 times plus generate enough force to force it back into the boiler, this would require a lot of energy to do. It is much simpler and much more cost effective (energy wise), to condense the steam and exhaust the excess heat to the cooling tower. The condensed water can then be pumped back to the boiler in stages to repeat the cycle. In these stages the water is de-aerated, treated and heated back to the boiler's temperature to prevent thermal shock in the boiler. In short condensing the steam is easier, safer and cheaper than trying to mechanically compress it. **By the way, there are vacuum pumps called "hoggers" or steam powered ejectors, and injectors which could do just what you suggest, but use exorbitant amounts of energy to do so. These are typically used in conjunction with condensers to eject non-condensible gasses from condensers.
How do you send a keylogger?
You send it via a Trojan and social engineering. Or rather you don't. It is illegal.
What is send keys in the visual basic?
SendKeys.Send ("A') would send the key A to the open application.
Why is it important to use virtual private network to send sensitive data?
Because now a days it is cheep and from vpn you can send the data securely. Because VPN split the datas into smaller cells as well send it through different routes. Because now a days it is cheep and from vpn you can send the data securely. Because VPN split the datas into smaller cells as well send it through different routes.
How I can get an HVAC license?
Send me $3.50
What is the purpose of boiler drum?
Purpose of the boiler drum is to collect steam from all the various tubes in a boiler, and send it to the turbine to spin the generator
What does a condenser microphone use that vibrates as sound waves strike it?
it make a wave that is send to outer space and its calls aliens to come to earth
What the function of hogger in ejector?
the hogger purpose it used to create intial vaccume for the condenser and send it to atmosphere .morover it enhance the swap betwwen to ejectors
Why steam enter at bottom and exit at top in gland of steam turbin rotor?
Gland steam always send from bottom because if we send the gland steam from top then it has a tendency to pass directly to the bottom (condenser) .Due to this reason gland steam is send from bottom so that it occupies total turbine inside vacuum space and seal it.
What type of feed pump are used in steam turbines?
Actually feed pump in the boiler is used to send water inboiler that is converted into steam whose kinetic energyis used to produce electricity. This pump can be driven byelectricity or steam from Turbine. In steam driven pumps, steam from tubine is bledand used to drive the impeller of pumpand send water in boiler.
Why steam is to be condensed in thermal power plant Y should not you use a compressor to suck compress and send back the steam at high pressure?
It's a matter of the steam cycle, the condenser in a condensing power plant creates a vacuum, or low pressure zone for the steam to flow into. A compressor would need to compress this steam 650 times plus generate enough force to force it back into the boiler, this would require a lot of energy to do. It is much simpler and much more cost effective (energy wise), to condense the steam and exhaust the excess heat to the cooling tower. The condensed water can then be pumped back to the boiler in stages to repeat the cycle. In these stages the water is de-aerated, treated and heated back to the boiler's temperature to prevent thermal shock in the boiler. In short condensing the steam is easier, safer and cheaper than trying to mechanically compress it. **By the way, there are vacuum pumps called "hoggers" or steam powered ejectors, and injectors which could do just what you suggest, but use exorbitant amounts of energy to do so. These are typically used in conjunction with condensers to eject non-condensible gasses from condensers.
How do you get a boiler operator license for the state of NY?
At the present time Ct does not have a statewide Boiler operator license. Some citys in Ct do require a license . A statewide license is being contemplated for the near future. The nearest chapter of the "National Association of Power Engineers" NAPE would be able to where you could apply for a boiler operators license or training. Give them a call. Bear
How do you flush the ac unit on a 1996 cadillac deville?
The manufacturer doesn't "necessarily" recommend flushing this system. They go on to state that since it is very unlikely to that a flush would completely clean the condenser, it should be changed along with the compressor, accumulator and orifice tube; in the event of a compressor failure. (When compressors fail they tend to send debris throughout the AC system, it can and will get caught in the small orifices of the condenser evaporator, accumulator and orifice tube) However, while you have the AC lines, orifice tube (removed), accumulator and evaporator disconnected; use compressed air (from a shop compressor) to blow out each line as well as the evaporator and condenser.
What is the future tense of send?
The future tense of "send" is "will send" or "shall send." For example, "I will send the email tomorrow" or "She shall send the package next week."
Will send to you or will sent to you?
The correct phrase is "will send to you." "Sent" is the past tense of send, while "send" should be used for future actions.
Which is correct 'send you my cv' or 'send to you my cv'?
send my CV to you.
Will be send?
wil be send
