The rating of the machine (kva or kw) depends upon the power factor, since the load power factor to which the transformer is supplying power is not known, it may be capacitive, inductive, or resistive that is why its rating is in kva not in kw.
the capacity of a transformer is defined as a product of voltage and current flowing through it.AS THE CURRENT IS MEASURED IN AMPERES AND VOLTAGE IN VOLTS, Hence transformers are measured/rated in KVA
In 1600 kva transformer we provide NGR (Neutral grounding resistance)
VA or KVA or MVA
How long's a piece of string? It obviously depends on how big the transformer is!
Transformers are rated in KVA, both the primary and secondary windings have the same KVA rating. (KVA is the voltage multiplied by the amperage then divided by 1000). If you have a 10 KVA step up transformer with 120V on the primary: A = 10k / 120 = 83.33A and if the secondary produces 240V: A = 10k / 240 = 41.667A
the capacity of a transformer is defined as a product of voltage and current flowing through it.AS THE CURRENT IS MEASURED IN AMPERES AND VOLTAGE IN VOLTS, Hence transformers are measured/rated in KVA
The 3 kVA transformer will weigh double the 1.5 kVA transformer.
Depends on the kva rating of the devices to be tested using a transformer.
In 1600 kva transformer we provide NGR (Neutral grounding resistance)
transformer action doesn't depend on power factor that is why we indicate its rating in KVA
The result is that the transformer runs cool and contented. The '250 KVA' rating on the transformer is its maximum ability to transfer power from its input to its output without overheating, NOT an amount of power always running through it. If the 3 KVA load happens to be the only thing connected to the transformer at the time, then only 3 KVA flows into the transformer from the primary line, and only 3 KVA leaves the transformer secondary.
cost of 630kVA transformer
The kVA rating will be listed on the transformer's nameplate, which is usually on the front of the transformer. The 480v to 120v is irrelevant, because many transformers with different kVA ratings convert 480 volts to 120 volts. The kVA ratings can be different and thus affect the rated current through the transformer.
yah! definately affects, the kva of transformer is suitable for the certain load according to the rating.
You can tap off approximately 833 200 amp panels from a 250 kVA transformer. This calculation is based on dividing the kVA rating of the transformer by the current rating of the panel.
frequency. KVA is also same in both side of a transformer!!! KVA means Kilo Volt Ampere.
Yes, but your input current is going to be high at 133 amps. The output of the transformer is not going to be 16 KVA, that is the rating of the transformer.