0
Add your answer:
Earn +20 pts
Why do houses in places that get heavy rains have sloping roof?
A sloped roof allows water to flow go off the roof. Otherwise, the accumulation of rain water on a roof and its weight could exceed the ability of the roof to support it and might collapse the roof. The accumulation of water would also decrease the ability of the covering material to keep water out of the inside of the structure.
What advantages of pitched roof compare with flat roof?
A flat roof is a maintenance nightmare year after year. So many people have made that mistake only to later put a pitched roof over the flat roof to avoid any more hassle.
What is the difference between a flat roof and a pitched roof?
The angle, in comparison to "level".
Repair a flat roof?
You could try Permaroof. This company repaired my roof and was well impressed
Why petrol station in Malaysia roof flat?
Petrol station in Malaysia roof flat because need to stop from burning. If heat can be inside, there will be much danger of possibly. Fire will to destroy many. But if petrol station roof flat then has chance not to inchange spark fire for not to come to life. Flat helps for keep every balance.
Why would a sloped roof be better than a flat roof?
A flat roof would be better than a sloped roof because a flat roof is significantly cheaper to build. Another consideration of a flat roof would be that it is a more modern design and would fit a more contemporary home.
How much to tansform a flat roof into a slopping roof?
Usually the best way is to simply build a new sloped roof onto the flat roof.
If you change flat roof to sloped roof do you need to change the interior of the house?
Yes
Would a pyramid-shaped roof be better than a flat roof?
On house, why might a pyramid-shape roof be better than a flat roof?
Would a pyramid shaped roof be better than a flat roof?
On house, why might a pyramid-shape roof be better than a flat roof?
Flat Roof Plusses and Minuses?
Those who live in a building with a flat roof have advantages and disadvantages. A flat roof will not cause as many problems with gutters as a sloped roof would. It is also possible to shovel snow right off of the flat roof. However, it is also possible to have too much snow accumulate on this type of roof which can cause a cave-in or sagging. A flat roof may leak more from too much rain. However, in the extreme cold weather, icicles are not much of a problem with a flat roof. Since the water from the snow doesn't drip down as much as on a sloped roof, the icicles don't have a chance to form.
Why are the roofs of factories sloping?
Sloped roofs facilitate rain removal much better than flat roofs... even an inch of water on a flat roof can add many tons of weight to the roof structure, depending on roof size. Same with snow / ice buildup in winter. A sloped roof also aids in heat removal from inside the building, as the hottest air will tend to rise... and with large industrial fans located in the highest portions of factory walls, make it easier to vent outside, reducing the number of fans needed to do the same job as a flat roof...
How do you install a sloped roof over an extisting flat roof?
You cut rafters, brace them as needed depending on the span and shingle it. I put one on a friend of mines. I cut the outside ends of the rafters at an angle so that I didn't need to change the fascia. Lay a 2x6 flat on the existing roof to run the braces down to. Your roof may not be flat but have a slope one way on it so you will have to take that into consideration for the peaked roof. He had a slightly sloped roof with tar and gravel on it and at the time I was able to put a pitched roof on for less than they wanted to re tar the flat one.
Is there a hail-proof rubber roof available for residential buildings?
There are no real hail proof roofs but there are hail ratings of roofs rated 1 - 4 with 4 being the highest rating. A rubber roof is not your only option and the best type of roof for you will depend on if your roof is flat or sloped.
A framework that is used to help support the construction of a sloped roof?
truss
How do you make model of a house with sloped roof in 3ds max?
dfd
How would it like if a pentagon have two pairs of congruent sides and two pairs of congruent angles?
It could look like a child's drawing of a house: a rectangular shape with a triangular roof on top.The vertical sides of the rectangle, and the sloped sides of the roof would be the two congruent pairs of sides.The angles at the base of the rectangle and at the base of the roof would be the two pairs of congruent angles.It could look like a child's drawing of a house: a rectangular shape with a triangular roof on top.The vertical sides of the rectangle, and the sloped sides of the roof would be the two congruent pairs of sides.The angles at the base of the rectangle and at the base of the roof would be the two pairs of congruent angles.It could look like a child's drawing of a house: a rectangular shape with a triangular roof on top.The vertical sides of the rectangle, and the sloped sides of the roof would be the two congruent pairs of sides.The angles at the base of the rectangle and at the base of the roof would be the two pairs of congruent angles.It could look like a child's drawing of a house: a rectangular shape with a triangular roof on top.The vertical sides of the rectangle, and the sloped sides of the roof would be the two congruent pairs of sides.The angles at the base of the rectangle and at the base of the roof would be the two pairs of congruent angles.
