0
It holds the lense its kinda obvious :)
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
What is definition of centre of curvature of lens?
define the term centre of curvature
Crile-wood needle holder definition?
A Crile-Wood Needle Holder is a surgical instrument used to hold needles to suture in cardiovascular surgeries. It holds very small needles.
What is the Definition of working distance in microscopy?
The working distance is the distance between the cover slip and the bottom of the housing fo the objective lens.
What does titulaire mean?
It means holder. Like account holder, passport holder and others.
Should eyeglasses lens have an apostrophe?
Yes it should be eyeglass' lens because the lens belong to the eyeglasses
What is convex lens definition?
the surface is bulging outwards from the lens
How can burned out license plate lights on a 2005 Ford Escape be replaced?
You need the replacement bulbs,flat head screwdriver and socket set. (don't remember the size ..3/8 to 1/2 socket)? Open the lift gate to the point whereyou see the socket holders (lens). Noting the direction of the arrow on the lens (should be pointing to the right). Using your fingers and screwdriver push and hold the lens as far as it will go (to the right) thenlift and unsnap the holder from the body panel. While looking at the back of the lens, twist and remove the bulb socket from the lens holder. Be sure to hold onto bulb socket so that the connecting wires do not pull the socket into the panel cavity. Put the lens holder aside. Using your fingers pull the bulb from the socket and replace with the new bulb. Return the bulb socket to the lens holder by aligning the clipson the socket to the notched holes on the holder and and turn andlock the socket into the holder. Align and insert the spring clip (the one that you can squeeze) on the holder, with the notched portion of the hole on the liftgate panel. Push to the right until the holder snaps back into the liftgate panel. Repeat the procedure for the left lens. It was necessary to loosen the screw (immediately to the right of the lens holder) on the leftgate handle because it prevented the lens holder from being pushed to the right..this was only for the left lens...use thesocket wrench.
What is the definition for flat or plane lens?
i dont know lens that help u see !
How do you get the bulb holder out of the tail light lens on a 1999 Jeep Grand Cherokee?
Push in and turn it counterclockwise.
Are plano lens convex?
No - by definition. You can have a plano-convex (or -concave) lens (one side flat). Actually a purely plano "lens" would be merely a glass disc.
What is definition of centre of curvature of lens?
define the term centre of curvature
Is the word lens plural?
No .Definition of lens (noun)form plural: lensespart of the eye that helps to focus light on the retinaExamples of lensA cataract on the lens leads to blurred vision.
What is the definition of diaphram?
a device to reulate the amount of light entering the lens of a camera
What is the definition of testtube holder?
A rack with holes which is designed to hold test-tubes.
Transparent material with one or two curved surfaces that can refract light?
That is the definition of a lens
Do 2002 Ford rangers have hidden access screws for the rear tail lens Can the bulb holder be accessed without removing lens?
drop the tailgate and the screws will be visable on the side of the bed that is hidden when tailgate is closed
How do you replace license plate light bulb on a 2002 jeep grand Cherokee?
Unscrew the screw holding the lens on. Remove the lens and reflector assembly. Twist the rubber bulb holder to remove it from the lens/reflector. Pull the bulb straight out. Replace the bulb. Installation is opposite of above.
