0.9mm
.030
A spark plug for a 2003 Mazda Protege has a 14 mm thread size, and a 19 mm reach. The gap is 1.1 mm.
.039-.043" gap 14-22 ft/lbs torque
0.043 for 2002. Go with a platinum tipped. 14 - 22 Ibs with a torque wrench
The gap is preset at the factory but is always a good idea to doublecheck to make sure it is correct.
a loos 35 thow or 0.9mm should have you runing prity good. your dwell or point gap is more important. try 14 thow loos with feeler gage.
14-16Kohm / metre
there is a spark plug for every cylinder so there are four spark plugs 14 or 16 gauges
Cover the cutting end of the 14 mm tap with grease, insert the tap into the spark plug hole, apply high temp (red) silicon sealant to the outer threads of the insert and install the spark plug and torque it.
The Honda XRM typically uses a spark plug with an NGK CR7HSA designation. The spark plug thread size is generally 14 mm with a pitch of 1.25 mm. The reach of the spark plug is usually around 19 mm. It's always best to consult the owner's manual for specific details or any updates regarding your particular model.
14-38 is the best sprocket combination, using an iridium spark plug or any upgrade of spark plug. it will surely deliver power and speed. and you don't need to open your engine for more upgrades.
I have same. firing order is 123456. *cylinder #s(drivebelt end to transaxle end) rear bank 135 front bank(radiator side)246 *coil terminal connection 14 63 25 *spark plug gap 0.045in