Yes, it's advisable to replace the pulleys when installing a new timing belt on a 1994 Volvo 850. Worn or damaged pulleys can lead to premature wear of the new belt and may cause engine performance issues. Additionally, replacing the tensioner and idler pulleys ensures the timing belt operates smoothly and maintains proper tension. This preventative maintenance can help avoid costly repairs in the future.
I would like to install a timing belt on my 93 960 volvo / how do I line up the cams with the crank shaft???
how do adjust timing belt on a volvo 240 DL ?
To replace the timing belt on a 2004 Volvo S60, first, disconnect the battery and remove the engine covers and accessory belts. Align the timing marks on the crankshaft and camshaft pulleys, then remove the old timing belt. Install the new timing belt, ensuring proper tension and alignment with the timing marks. Finally, reassemble the components, reconnect the battery, and start the engine to check for proper operation.
Timing BELT
This link has the pics you need. Volvo 2.3 Timing Marks Pics
From Spokane Volvo Jag and Land Rover......the initial timing is 10 to 12 degrees!
The timing marks on your 2001 Volvo S40 can be found on the outside of the main pulley. The timing marks will be scattered around the edge of the pulley.
To install a water pump in a 1995 Volvo 850, first disconnect the battery and drain the cooling system. Remove the serpentine belt, then detach the timing belt cover and the timing belt itself to access the water pump. Unbolt the old water pump, clean the mounting surface, and install the new pump with a new gasket. Reassemble everything in reverse order, refill the cooling system, and check for leaks.
To change the timing belt on a Volvo V70, begin by disconnecting the battery and removing any obstructions, such as the engine cover and accessory belts. Next, align the timing marks on the crankshaft and camshaft pulleys to ensure proper timing, then remove the old belt. Install the new timing belt, ensuring it is tight and correctly aligned with the timing marks, and then reassemble all removed components. Finally, reconnect the battery and start the engine to check for proper operation.
To adjust the timing on a 1993 Volvo 240, first, ensure the engine is at operating temperature and then turn off the ignition. Locate the timing marks on the crankshaft pulley and the timing cover, and use a timing light to check the current timing. If adjustment is needed, loosen the distributor hold-down bolt and rotate the distributor slightly to advance or retard the timing as necessary. Once adjusted, re-tighten the bolt and recheck the timing to ensure it's within the specified range.
It has a timing belt,
how to install volvo 740 turn signal lens