The cam belt must be changed every 105,000 or 10 years whichever comes first. Warning: This is an interference engine.
Must be changed every 105,000 miles or 7 years whichever comes first. Warning: This is an interference engine.
Yes and it must be changed every 105 thousand miles or 10 years whichever comes first. Warning: This is an interference engine.
This either means that your emergency brake (hand brake) is on, the light switch needs to be fixed, OR (most common) you need to add more brake fluid. Always check your brake fluid first!
It must be changed every 105,000 miles or 10 years whichever comes first. Warning: This is an interference engine.
To reset the brake warning indicator on a 2009 Porsche Cayenne, first ensure that the parking brake is fully released. Next, turn the ignition to the "On" position without starting the engine, then press the gas pedal three times within five seconds. After that, turn off the ignition and restart the vehicle; the warning light should be reset. If the warning persists, check for any underlying issues with the brake system.
To reset the brake warning light on a Porsche 928, first check and ensure that the brake fluid level is adequate and that the brake system is functioning properly. If the fluid level is correct and there are no issues, turn the ignition to the "on" position without starting the engine. Then, press the brake pedal several times; this should reset the warning light. If the light remains on, it may indicate a deeper issue that requires professional diagnosis.
Must be changed every 60,000 miles or every 10 years whichever comes first. WARNING: This is an interference engine. If the belt breaks you will have internal engine damage.
Well the first thing that you would want to do is to check your vehicles brake fluid. Typically, if the brake fluid is low then your brake pads probably need to be changed.
The 2005 Honda Civic has a timing belt that must be changed every 105,000 miles or 10 years whichever comes first. Warning: This is an interference engine.
To wire a brake failure switch on an XB Falcon, first locate the switch, typically mounted on the brake line or near the master cylinder. Connect the switch's terminals to the brake warning light circuit, ensuring that one terminal connects to the power source (often from the ignition) and the other to the brake warning light. When the brake system experiences a failure and pressure drops, the switch will close, illuminating the warning light on the dashboard. Always consult the vehicle's wiring diagram for specific details and ensure all connections are secure.
Alternater may not be charging would be my first thought.