There are 4 bolts holding the seat down (same on all 106s) situated at the front and rear of the slide rails. These require a Torx T40 driver.
Be sure to unplug the Seatbelt tensioner lead before lifting the seat up and don't drop the seat onto a hard surface or hit the seat belt buckle assembly with any object as the tensioner system (located in the seat belt buckle) has a small explosive charge in it.
TNT
Remove front passenger seat on Lexus es300?
how do I remove the front seat from a 1991 fatboy
Remove the 10mm bolt from behing the rear seat. Then pull the rear seat it hooks to the front seat in the front. Remove the bracket there and pull the front.
To remove the rear seats from a Peugeot 307 CC, start by locating the bolts securing the seat base; these are usually found at the front edge. Use a socket wrench to remove the bolts, then lift the seat base upward and out. For the seat back, check for any clips or bolts at the base and sides, unfasten them, and then pull the seat back upwards to detach it. Always consult the vehicle's manual for specific instructions and safety precautions.
To remove the seats in a Peugeot 307CC, start by sliding the seat forward to access the rear bolts. Use a socket wrench to remove the bolts securing the seat to the floor. Once the bolts are removed, gently lift the seat out while disconnecting any electrical connectors if present. Finally, repeat the process for the other seat if necessary.
Use your key on the left side by the seat. turn it counterclockwise. and the front seat should pull off. Once you remove the front seat there are two releases to remove the rear seat.
Move seat fully forward, remove side trim, remove seat belt retaining bolt, remove seat tracks rear bolts, flip seat upwards, disconnect wiring, remove seat.....
To remove the rear seats on a Peugeot 406 Coupe, start by locating the seat base clips or bolts, usually found at the front or sides of the seat. Release any clips or unscrew the bolts to detach the seat base, then lift it out. For the backrest, check for bolts or clips at the base or sides, remove them, and then carefully lift the backrest out of its mounting points. Always consult the vehicle's manual for specific instructions and safety precautions.
theirs a handle under the front seat push it to the left and the seat will turn to the left at the same time
You need to remove the rear seat before you can removed the front. First removed the one screw on the back of the rear seat then removed the two screws on the front of the rear seat. You can not get to the front screws until you remove the rear screw.
1) Remove the back seat (pillion seat) 2) Then remove the screw that holds the front seat ( its in the middle), with a philips screwdriver/ allen key 3) lift out the front seat and locate the battery