0
What else can I help you with?
P1345 crankshaft position camshaft position correlation?
Replace the crankshaft and camshaft senors and then clear the codes with an oBD II engine scanner and that will fix it.
What does the check engine light mean when it comes on for a 2001 passat?
It comes on when the engine computer detects a malfunction and sets a code. You need to have the system checked for codes.
Why does the check engine light come on your 2003 VW Passat 1.8T the codes can not identify the problem?
take it to a dealer or a qualified mechanic for a diagnostic
98 Hyundai Elantra that is running rough you are getting check engine codes that say there is a problem with the camshaft position and code that say their are random misfires Any ideas?
A bad camshaft position sensor will cause a engine to run very rough or not run at all. Replacing the camshaft sensor is very complicated.
Find camshaft position sensor on a 3.3 Nissan engine?
The camshaft position sensor is an integral part of the distributor. If codes and tests indicate that it is faulty, the distributor must be replaced. Last I looked a cheap one was $1,500.
What are the symptoms of a bad camshaft position sensor on a 2000 Chevy Astro?
Symptoms of a bad camshaft position sensor in a 2000 Chevy Astro can include poor engine performance, such as misfiring, rough idling, or stalling. You may also notice decreased fuel efficiency and difficulty starting the engine. Additionally, the check engine light may illuminate, and diagnostic trouble codes related to the camshaft position sensor may be triggered.
What could be the problem if you get codes that say intermitted signal lost at camshaft sensor when you replaced the distribtor with a new camshaft?
Camshaft sensor interrupter will send that code.
What does P0340 engine codes on a 2001 dodge stratus indicate?
P0340 Camshaft position sensor circuit P0340 (M) No Cam Signal At PCM No fuel sync.
Where is the camshaft position sensor on a 1999 Saturn sl1?
The camshaft position sensor on a 1999 Saturn SL1 is typically located near the camshaft itself. It is often situated on the cylinder head or timing cover, close to where the camshaft rotates. Refer to your vehicle's specific service manual for the exact location.
What are the symptoms of a bad camshaft position sensor in a 1998 Dodge Intrepid?
The Check Engine Light should be on if the sensor is faulty. The car may or may not hesitate, stall, or accelerate poorly. To read the engine error codes, cycle the ignition key from "off" to "on" three times: Turn the iginition key to the "on" position where the check engine light comes on but do not start the car. Turn the ignition key to off, then on, off, and on again and leave the key there. The odometer will read out any error codes. P0340 and P0344 are trouble codes for the camshaft position sensor.
How do you know if your 1999 Volvo s80 2.9 engine needs a camshaft sensor?
You may need to replace the camshaft sensor in your 1999 Volvo S80 2.9 if you experience symptoms like rough idling, poor acceleration, or engine misfiring. Additionally, if the check engine light is illuminated, it can indicate a malfunctioning sensor, which can be confirmed by using an OBD-II scanner to check for related error codes. Unusual changes in fuel efficiency or difficulty starting the engine can also be signs that the camshaft sensor may need replacement.
What does the SERV light on a Renault laguna 1997 1.9 automatic mean?
Get the ecu codes read, there is a fault code listed in the engine ecu
