answersLogoWhite

0

Potentially, Yes.

The "EML" warning light in a BMW indicates a problem with the "drive by wire" throttle control system."

Drive by wire" throttles use a computer controlled stepper motor rather than a purely mechanical linkage (usu. metal cable attached directly to the accelerator pedal) to control the opening and closing of the throttle plate.

A flashing or solid "EML" light does not explicitly mean the throttle body is bad, but this can be the case as the throttle has many heavily used moving parts (both mechanical and electrical) with great potential to wear out and fail. The "EML" system is quite complex and service typically requires a factory trained (or exceptionally skilled mechanical & electrical) technician, with access to sophistocated diagnostic tools.

The "EML" system plays a major role in the control of the engine. An "EML" light will often be accompanied by very noticable vehicle driveability issues. Stalling, stumbling, low idle, extremely rough idle, and/or a lack of throttle response are all very common.

Depending on the year of the vehicle, a problem with the "EML" system can be difficult to diagnose, and very expensive to repair. If the throttle is determined to be the problem, it is possible a disassembly and cleaning of the throttle motor, motor brushes and sensors can help, but this is something one would have to do on their own.

Owners of earlier BMW cars may opt to retro-fit a standard mechanical linkage (cable, throttle, pedal) to their cars, but this can also be very difficult/expensive and will elminate some of the features the "EML" system provides (traction control, cruise control).

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

How do you replace a throttle body Chevy Trailblazer?

How do you replace a throttle body on a trailblazer 2002


How do you replace a throttle sensor in a 1988 Nissan Sentra?

Is it easy to replace a throttle body in an 88 sentra? How do you clean a throttle body


Where is the throttle positioning sensor on a 2003 Nissan Sentra?

If it is similar to the 2002, and I believe they are, It is permanently attached to the throttle body. To replace the sensor, you have to replace the whole throttle body.


Where is throttle position sensor on 2008 dodge ram 5.7L?

It is a part of the throttle body. You have to replace the throttle body if faulty.


How do you replace the fuel injector on a throttle body Nissan 3.0?

how to replace fuel injector throttle body in a 1988 nissan pathfinder 3.


How do i fix a Coolant leak under the throttle body?

You will need to remove the throttle body and replace the throttle body gasket. The throttle body gasket can be purchased at most auto-parts stores.


Where is the throttle position sensor located on a 1994 escort wagon?

On the side of the throttle body opposite where the throttle cable connects. In other words the side of the throttle body facing the fire wall. You will probably have to remove the throttle body itself to replace the sensor as the screws that hold it to the throttle body are vary difficult to loosen.


Accelerator sticks on 2004 Toyota?

Lubricate or replace control cables Replace throttle body


Where is the 2005 Nissan Altima Throttle switch?

You can not change just the TPS for this car. You have to replace the entire throttle body.


How do you replace a throttle body sensor on a 1995 e-150 van?

To replace the throttle body sensor on a 1995 E-150 van, first disconnect the negative battery terminal for safety. Remove the air intake duct to access the throttle body, then disconnect the electrical connector from the throttle position sensor. Unscrew the sensor from the throttle body and replace it with the new one, ensuring it's properly aligned. Reconnect the electrical connector, reattach the air intake duct, and reconnect the battery.


How do you replace a speedometer cable in a 1996 Honda civic?

There is not speedometer cable on a 1996 Honda Civic. There is a throttle cable. Top replace this unhook it from the throttle body and gas pedal. Hook on the new cable to snake it through the firewall. Properly hook the throttle cable to the gas pedal and throttle body.


How to replace the front right side turn signal assembly for a 1985 Lincoln Continental?

i need to replace a throttle sensor and put a throttle body rebuild kit in