In the driver's side back corner of the engine compartment is a little black box with a test lead attached. Open the box, place the test lead into socket #2 and press the button for 1 second. The codes will then flash on the red LED light.
If your check engine light is on, the codes may be:
112 Fault in ECU
113 Fault in Fuel injectors
121 Fault in Air Mass Meter
123 Fault in Coolant Temp Sensor
212 Fault in O2 Sensor
221 Extremely rich or Lean at cruise
If Check Engine Light is not on:
111 No Fault
131 RPM signal missing
132 Battery Voltage low or high
223 Fault in air control valve signal
231 Rich or Lean at cruise
232 Rich or Lean at Idle
233 Air Control Valve closed due to leak
311 Speed Signal missing
312 Anti-knock signal missing
how do adjust timing belt on a volvo 240 DL ?
5x108mm
If they're identical, yes. Try it and find out.
how can i repair a wirie taht has been broken from alternator to wiring harness on 1990 volvo 240?
no
The oil pan is bolted to the bottom of the engine
That's correct it's electronic.
Under the hood by the left hood hinge.
1 - 3 - 4 - 2 The distributor rotor turns CLOCKWISE
1 - 3 - 4 - 2 The distributor rotor turns CLOCKWISE
My manual says 3500lbs with a 300lb tongue weight. I personally wouldn't tow anything over 2500 lbs with a 240.
Worn brushes, bad Regulator, or Likely a bad connection or wiring.