There is no clutch cable in 93 Mercury Capri. Its operated by hydraulics. There is a clutch slave cylinder and master cylinder. the seal in it probably worn out. Not very hard to work with.
Look in this web site for complete instructions: www.techcapri.com.
To replace the clutch on a 1991 Mercury Capri, start by disconnecting the battery and removing the transmission. This involves taking off the driveshaft, exhaust, shifter linkage, and any electrical connections. Once the transmission is out, remove the old clutch assembly, clean the flywheel, and install the new clutch, ensuring proper alignment. Finally, reassemble all components in the reverse order, and reconnect the battery to complete the job.
its a hydraulic clutch and needs no adjustment, if its loose it typically means its worn
first you push in your clutch and put your key in the ignition. then you turn the key clockwize until your capri springs into life.
You can find a clutch cable for a 1994 Mercury Capri XR2 at auto parts stores like AutoZone or O'Reilly Auto Parts. Additionally, online retailers such as RockAuto, Amazon, or eBay often have parts available. Checking with specialized websites that focus on classic or vintage car parts may also yield results. Lastly, local junkyards or salvage yards could have used parts available for this model.
www.techcapri.com has instructions on this.
Please see the same question on the 91 Capri. The procedure is the same.
it has an automatic adjuster on it. with the petal in the up position pull up on the petal and if the adjuster is working it will take the slack out of the cable. if not the adjuster needs to be replaced and this is not a fun job.
NO
http://www.techcapri.com/Repair/Capri_Service_Manual.htmthis link will give you all of the information you will need
Mercury Capri was created in 1969.
The throttle cable may be broken.